       |
File 100352-BC
 |
 |
|
5,600 m3 Sand Carrier with Notch Tug
This Pusher Tug was built in 1999 at the Honwa Shipyard in Japan and the Sand Carrier was built in November, 2000 in China (Japan Management).
Located in Japan
Price for Carrier & Tug: USD $ 12,600,000 |
Technical Details
| Principal Dimensions and Characteristics |
| Pusher Tug |
| |
Connector Type: |
Hydraulic Pintle Point / Fore, Starb, Port - 3 Pintle Type |
| |
Year Built: |
1999 |
| |
Length Over All: |
28.80 m
|
95 feet |
| |
Beam: |
9.00 m |
30 feet |
| |
Depth: |
3.52 m
|
12 feet |
| |
Draft: |
3.10 m
|
10 feet |
| |
Fwd: |
2.50 m
|
8 feet |
| |
Aft: |
3.70 m |
12 feet |
| |
Maximum speed: |
10 knots |
| |
Shackle: |
150 m |
492 feet |
| |
Fuel: |
Bunker - A / Bunker - C |
| |
Oil heating mixer: |
| |
Model/Type: |
KANAKAWA / F-PUX |
| |
Heater Capacity: |
18 kW |
24 hp |
| Main Engines (2) |
| |
Make/Model: |
AKASAKA |
| |
Power: |
1,471 kW x 2 |
1,973 hp x 2 |
| Auxiliary Engines (2) |
| |
Make/Model: |
YANMAR / 6HAL-HIN |
| |
Power @ 1,800 RPM (220 kva) |
176 kW x 2 |
236 hp x 2 |
| Generator |
| |
Make/Model: |
DOOSAN / D1146T |
| |
Power: |
1,000 kW |
1,341 hp |
| Navigation Equipment |
| |
Y’ / SOLASS RULL OK |
| |
Radar: |
NO1) FURUNO TYPE FR-1942 |
| |
Radar: |
NO2) JRC TYPE JMA-5106 |
| |
G.P.S: |
SAMYUNG / NAVIS-2600 |
| |
A.I.S: |
SARACOM / SI-10D |
| |
Sounder: |
FURUNO / FCV561M2 |
| |
V.H.F: |
FURUNO / FM-8500 |
| |
V.H.F: |
SAMYUNG / STR-6000B |
| |
GYRO: |
TOKYOKEKI |
| |
S.S.B: |
SAMYUNG / SRG-1150 |
| |
Winder: |
21S GOKJEONGKI KOREA |
| |
Navitex: |
HANSHIN / NR-S4H-1 |
| |
Telephone: (3 each) |
HANSHIN / HANT-101 |
| |
Rudder Angle Gauge: |
1 set |
| |
Ship's Indication: |
1 set |
| |
Barometer: |
1 set |
| |
Whistle: |
IZUMI TYPE ELECT |
| |
Weather Fax: |
JRC / JAX-9A |
| |
Fax: |
SAMYUNG / CF-340 |
| |
Printer: |
SAMYUNG / ML-5080C |
| |
INMARSAT: |
ASTI TYPE NEAR |
| |
| Sand Carrier |
| |
Year Built: |
2000 |
| |
Gross Tonnage: |
4,292 |
| |
DWT: |
about 8,000 tonnes |
| |
Length Over All: |
103.77 m
|
340 feet |
| |
Beam: |
20.00 m |
66 feet |
| |
Depth: |
7.20 m
|
24 feet |
| |
Draft: |
5.20 m
|
17 feet |
| |
Hold Capacity: |
5,632 cubic meters |
7,366 cubic yards |
| |
Anchors: |
2 each |
| |
Hatch Cover: |
Mag Type |
| Sand Cargo Equipment |
| |
Make/Model: |
VOLBOEC700B / BAGKO BAKET 2TRIP |
| |
Discharging Time: |
3 - 4 hours |
| Sand Pump Generator |
| |
Make/Model: |
DAIHATSU / 6DK-32 |
| |
Power: (2,000 KVA) |
1,600 kW |
2,146 hp |
| Sand Pump |
| |
Make/Model: |
KURIMOTO |
| |
Suction: |
610 mm |
24 inches |
| |
Power: |
800 kW |
1,073 hp |
| Auxiliary Engine |
| |
Make/Model: |
YANMAR 6GX-GT |
| |
Power: |
405 kW |
543 hp |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges