       |
File 100379-BC
 |
|
849 m3 Hold Barge with 70 tonne Crane
This Barge was built in 1988 in Japan and its
Classification Society is (KM) III Crane Ship. Freeboard Zone: Restricted III, Coastal navigation is permitted with a 6-m wave height of a 3% probability, with sailing from a shelter place within
50 NM with an allowed distance between shelter places not more than 100 NM, excluding navigation in ice conditions.
Located in Far East Russia
Price for Crane Barge: USD $ 2,800,000 |
Technical Details
| Principal Dimensions and Characteristics |
| Barge |
| |
Year Built: |
1988 |
| |
Classification Society / Class: |
(KM) III Crane Ship
|
| |
Length Over All: |
48.20 m
|
158 feet |
| |
Molded Length: |
45.00 m |
148 feet |
| |
Molded Beam: |
14.00 m |
46 feet |
| |
Molded Depth: |
4.00 m
|
13 feet |
| |
Maximum Draft: |
3.50 m
|
11.5 feet |
| |
GRT / NRT: |
928 / 278 |
| |
Deadweight: |
1,110.37 tonnes |
| |
Cargo Hold |
846.7 cubic meters |
1,107.4 cubic yards |
| |
Length: |
18.0 m |
59 feet |
| |
Width: |
11.2 m |
37 feet |
| |
Height: |
4.2 m |
14 feet |
| |
Fuel Oil Supply: |
74.9 cubic meters |
98 cubic yards |
| |
Lubricating Oil Supply: |
2.46 cubic meters |
3.22 cubic yards |
| |
Fresh Water: |
26.18 cubic meters |
34.24 cubic yards |
| Main Engine |
| |
Make/Model: |
YANMAR / MF26-ST |
| |
Power: |
880 kW |
1,180 hp |
| Generators (4) |
| |
Make/Model: (2) |
YANMAR / 4CHL-TN (Diesel) |
| |
Power: |
45 kW x 2 |
60 hp x 2 |
| |
Make/Model: (1) |
KOMATSU (Harbor Diesel) |
| |
Power: |
60 kWA |
| |
Make/Model: (1) |
YANMAR / AG15S (Harbor Diesel) |
| |
Power: |
15 kWA |
| Bow Thruster |
| |
Make/Model: |
ISUZU / UM6BD1TC |
| |
Power: |
123 kW |
165 hp |
| Crane |
| |
Make/Model: |
SKK-500GDA-H |
| |
Crane Engine: |
| |
Make/Model: |
MITSUBISHI |
| |
Power: |
550 kW |
738 hp |
| |
Maximum Capacity of the Crane: |
70,0 tonnes |
| |
Maximum Grade Ascending Ability: |
80° |
| |
Derrick Length: |
21.52 m |
71 feet |
| |
Derrick Outreach at 30°: |
21.2 m |
70 feet |
| |
Derrick Outreach at 60°: |
7.0 m |
23 feet |
| |
Crane Swing Sector: |
360° |
| Ballast Water |
| |
Forepeak: |
142.25 cubic meters |
186.07 cubic yards |
| |
Tank 1 (starboard/port): |
94.82 cubic meters |
124.02 cubic yards |
| |
Tank 2 (starboard/port): |
79.08 cubic meters |
103.43 cubic yards |
| |
Tank 3 (starboard/port): |
137.3 cubic meters |
179.6 cubic yards |
| Cargo Gear |
| |
4-cbm Grab: |
1 pc |
| |
3-cbm “Orange Peel” Grapple: |
1 pc |
| |
38.1-mt Cargo Block: |
1 pc |
| |
Seating Capacity: |
10 persons |
| |
Nucleus Crew: |
8 persons |
| |
GMDSS Equipment: |
-A1+A2 |
| |
Automatic Identifying System: |
TRANSAS, T101 |
| |
Ship Security Alert System: |
SSAS, T-400 |
| |
Mooring Winches (hydraulic): |
4 pc |
| |
Hall’s Anchor (Fore): |
2 pc |
| |
Common Anchor (Aft): |
2 pc |
| |
Ready Boat: |
Favorite F-420 |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges