       |
File 111121-BW
 |
 |
|
50-tonne Gottwald Floating Crane
This 50-tonne Gottwald Floating Crane was built in 2006 by Gottwald GmbH, Düsseldorf, Germany and the Pontoon was built in 2006 by Ravenstein, Deest, Netherlands. Its
Classification society is BV (Bureau Veritas).
Located in Europe
Price for Floating Crane: EURO € 7,655,000 (As Is Where Is) |
Technical Details
| Principal Dimensions and Characteristics |
| |
Length Over All: |
50 m
|
164 feet |
| |
Width: |
24.57 m |
81 feet |
| |
Draft: |
3.98 m
|
13 feet |
| |
GRT / NRT: |
1,345 / 403 |
| |
Year Built: |
2006 |
| |
Classification Society: |
BV (Bureau Veritas)
|
| |
Pontoon Body: |
| |
Material: |
Steel |
| |
Structure: |
Fully welded |
| |
Design: |
Transverse and longitudinal ribs |
| |
Rib distance: |
500 mm |
20 inches |
| |
Waterproof bulkheads: |
Five transverse bulkheads |
| |
Last thickness measurement: |
N/A (newly built in 2006) |
| |
Arrangement: |
The pontoon is divided up into compartments by means of two |
| |
|
longitudinal bulkheads and five transverse bulkheads. Some of |
| |
|
the side compartments serve as a water ballast tank and some |
| |
|
are void spaces and fuel tanks. The central compartment holds |
| |
|
the pump room and the crane base as well as a number of |
| |
|
smaller tanks for oil, waste water, etc. On the deck, there is a |
| |
|
structure accommodating an office, a canteen and a changing |
| |
|
room. |
| Crane |
| |
Make/Model: |
“Gottwald GmbH”, Düsseldorf / G HPK 8200 B (Manufactured 2006) |
| |
Capacity:
|
50 tonnes at a maximum radius of 43 m (141 feet) |
| |
Boom structure:
|
Framework |
| |
Boom length:
|
| |
Base: |
30 m |
98 feet |
| |
Connector:
|
23.08 m |
76 feet |
| |
Total length:
|
53.08 m |
174 feet |
| |
Mass: |
| |
Machine without counterweights:
|
222,600 kg |
| |
Counterweights:
|
| |
A: 1 x 33,750
|
33,750 kg |
| |
B: 3 x 33,750
|
101,250 kg |
| |
Total mass
|
357,600 kg |
| |
Load limiter: |
“Krüger” PSV 3/1 machine |
| |
Remote control: |
HBC Radiomatic transmitter with receiver |
| |
Crane Engine: |
| |
Make/Model:
|
Cummins / OSK-45G8 (Manufactured 5/2005) |
| |
Power @ 1,800 RPM
|
1,654 kW |
2,218 hp |
| |
Operating hours:
|
11,066 hours total |
| |
Maintenance:
|
conducted on 27/02/2009 after 7,266 operating hours |
| |
Generator: |
| |
Make/Model:
|
Marelli Generators / MJP 500 LAG B35 (Manufactured 5/2005) |
| |
Power @ 1,800 RPM
|
2,500 kVA |
| |
Hoisting wire winch: |
Electric (DC) |
| |
Connecting wire winch: |
Electric (DC) |
| |
Hydraulic pumps: |
(2) Two units, electrically driven, "Rexroth" brand |
| |
Reversible motors: |
(4) Four units, electric (DC) |
| |
Pulley: |
| |
Make/Model:
|
SMAG / 2006 |
| |
SWL:
|
50 tonnes |
| |
Unladen weight:
|
3 tonnes |
| |
Spare cables: |
| |
1 x hoisting cable:
|
38 mm x 276 m |
1.50 inches x 906 feet |
| |
1 x connecting cable:
|
42 mm x 148 m |
1.65 inches x 486 feet |
Deck Fittings |
| |
Winches: |
| |
Short and Long Side: |
| |
Two combined anchor/mooring winches (one cable drum). |
| |
Make/Model:
|
Ridderinkhof, Hasselt / MW-E |
| |
Drive:
|
Electric |
| |
Boat: |
A plastic ship’s boat |
| Miscellaneous |
| |
Marine telephone(s): |
One set, “Sailor” RT2048 |
| |
Intercom system: |
Present |
| |
Fire alarm system: |
Present (alarms in accommodations, pump room and crane) |
| |
Navigation lighting: |
Present |
| Accommodation |
| |
Carpentry: |
Fire-resistant, in good condition |
| |
Heating: |
Electric |
| |
Air conditioning: |
Standalone unit in the frame |
| Propulsion |
| |
The crane is not equipped with its own propulsion. |
| Electrical System |
| |
Generators (2): |
| |
Make/Model (1): |
Cummins / 6CTA 8.3 D (Manufactured 2006) |
| |
Power @ 1,500 RPM |
163 kW |
219 hp |
| |
Operating hours (approx.): |
21,000 |
| |
Make/Model (1): |
Cummins / 6CTA 8.3 D (Manufactured 2006) |
| |
Power @ 1,500 RPM |
163 kW |
219 hp |
| |
Operating hours (approx.): |
19,000 |
| Auxiliary Equipment |
| |
Deck wash pump: |
Two units present |
| |
Make/Model:
|
Deswi K&R / S80-70 |
| |
Capacity:
|
43 m3/hr – 5.5 bar |
| |
Drive:
|
Electric |
| |
Service air compressor: |
|
| |
Make/Model:
|
Atlas Copco / LE2-10S |
| |
Pressure:
|
10 bar |
| |
Drive:
|
Electric |
| |
Other: |
Fuel transfer pump |
| |
|
Waste oil pump |
| |
|
Lubricant transfer pump |
| |
|
Drinking water booster |
| |
|
UV drinking water sterilizer |
| |
|
Electric water heater |
| |
Switchboard: |
24/230/440 V – 50 Hz |
| Tanks |
| |
Fuel (2) approx.: |
43 cubic meters x 2 |
56 cubic yards x 2 |
| |
Drinking water (1) approx.: |
19 cubic meters x 1 |
25 cubic yards x 1 |
| |
Waste water (1) approx.: |
19 cubic meters x 1 |
25 cubic yards x 1 |
| |
Black water (1) approx.: |
72 cubic meters x 1 |
94 cubic yards x 1 |
| |
Lubricant (1) approx.: |
4 cubic meters x 1 |
5 cubic yards x 1 |
| |
Waste oil (1) approx.: |
4 cubic meters x 1 |
5 cubic yards x 1 |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges