       |
File 111124-BW
 |
|
25-tonne Duty Cycle (240-tonne Lift)
Floating Materials Handling Crane
This is a Manitowoc 4600S3 25-tonne Duty Cycle (240-tonne Lift) Floating Materials Handling Crane. It was built in 1969.
Located in The State of Louisiana, USA
Price for Floating Crane: USA $ 3,980,000 |
Technical Details
| Principal Dimensions and Characteristics |
| Crane |
| |
Year Built: |
1969 |
| |
Make/Model: |
Manitowoc / 4600S3 |
| |
Lift Crane: |
240 tonnes |
| |
50,000 lb. duty cycle rating @ 65 feet (19.82 m). |
| |
Crane has a Starboard side Frame 6 three drum deck winch and a Frame 7 three drum on the port. |
| |
The crane is equipped with (2) two 60 kW (80 hp) or larger generators. |
| |
Cab extensions give the operator an approximate eye level of 67 feet (20.42 m) above the water. |
| |
This is a real “duty cycle” lift/clam/drag machine with 99 tooth gears, independent boom hoist, 47-inch |
| |
(1,193.8mm) point sheaves and power tag option. |
| |
Main Engine: |
| |
Make/Model: |
Cummings / KTA1150 |
| |
Rear Engine: |
| |
Make/Model: |
Cummings / 855 |
| |
120 feet (36.58 m) of #27 boom & an extra #27 boom available 40 foot (12.19 m) butt. |
| |
(3) Three - 40 feet (12.19 m) inserts and 40 feet (12.19 m) medium point open throat top section with 6 1-3/8 |
| |
sheaves total sheave capacity is 8 spacer is used to run 6 sheaves. |
| Barge |
| |
Length Over All: |
51.82 m
|
170 feet |
| |
Beam: |
17.68 m |
58 feet |
| |
Depth: |
3.66 m
|
12 feet |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges