Dredges and Dredging Equipment

File 100119-VW

1,100 hp Ice Breaker Tug
More Photos
Drawing

1,100 hp Ice Breaker Tug

This Tug was built in 1959 Åsiverken, Åmål, Sweden. The Vessel was dry-docked for complete 4 year classification in July -09 and in Sep -09 for installation of bow thruster. Vessel is in very good condition, it has very few working hours on it and most of the time there has been a stand-by crew on board. Hull plates have not been corroded, dimensions similar as when being launched. It has a class certificate for Area III. a Int. load line certificate was issued in 2005, and a Int. tonnage certificate (1969) issued in 1994. The hull thickness, shaft, rudder and anchor chain were all surveyed in July, 2004. Stability booklet approved in 1997.

Flag: Finnish

Located in Finland

Price for Tug: EUR € 350,000


Technical Details
Principal Dimensions and Characteristics
  Year Built:      1959
  Material: Steel
  Length Over All: 25.31 m
83 feet
  Length Between Perpendiculars: 23.47 m 77 feet
  Beam: 7.68 m 25 feet
  Draft: 3.30 - 3.70 m
11 - 12 feet
  Molded Draft: 4.20 m
14 feet
  GRT/NRT: 135/41
  Bollard pull: 13.5 tons
  Bunkers:
  Diesel: 38 cubic meters 50 cubic yards
  Fresh water: 38 cubic meters 50 cubic yards
  Septic: 0.6 cubic meters 0.8 cubic yards
  Ballast: 17 cubic meters 22 cubic yards
  General Arrangement and Accommodations:
  Wheelhouse with sofa and navigation desk.
  Main deck holds a large saloon with TV and eight table seats, galley with fridge/freezer, electric stove with oven, microwave, WC and of course the large sauna with shower.
 

Below deck in fore is a large forepeak with chain locker and rope stores, accommodations with twin single and two double cabins, engine room, aft rope stores and steering gear room. 

Main Engine
  Make/Model: MaK 6 MU451 Ak
  Power @ 375 RPM 820 kW 1,100 hp
  Engine Built: 1965, installed in 1984 with only about 3,500 running hours total.
Propulsion 
 

Fixed Ø 1,750 mm (in.) 4-bladed propeller. 1 identical propeller in store.

Auxiliary Engine         
  Make/Model: Lister HR 401
  With Generators: 1 x RTD Swan 6431/1, 38 kVA generator, <3,000 running hours.
    1 x Scania DS 10 R60 114 kW with Asea OAYC28, 130 kVA generator, <500 running hours.
Pump         
  Make/Model: 1 x Volvo 6-cyl drives hydraulic pump
Bow-thruster         
  Diameter 480 mm (19 in,), 4-bladed propeller, 53 kW (71 hp) continuous, approx 90 kW (121 hp) temporarily.
Max pull 0,75 tons.
Hydraulic Deck Crane         
  10 t/m, wire winch with 50 m (164 ft.) 10 mm (0.39 in.) wire,  max current outreach 9 m (30 ft.).
Equipment         
  Furuno FR 810 DA radar
  Furuno Navpilot FAP 5001 autopilot
  Furuno SC-502 satellite compass
  Furuno GP-31 GPS navigator
  Sailor RT 2048 VHF
  Sailor RT 144C VHF
  Furuno FM 8500 VHF
  Radio Ocean Pocket 3000 portable VHF
  Icom IC-G M1500 E portable GMDSS VHF
  Robertson rudder indicator
  ESCO fire alarm system
  2 x Atlas Copco Airlet 530 starter air compressors
  Viking 6DK Solas A-pack 6 person life raft
  Hatlapa electric anchor winch with 2 x 125 m (410 ft.) chain and twin 250 kg anchors.
  Lidan 4 FB L8, 15 tons towing winch 500 meters of 28 mm wire, Mampaey towing hook.
  3.000 liters/minute emergency pump with 4” connection

All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.


Go to Top
DredgeBrokers © 2007
Dredge Brokers Design by thewritersforhire.com