Dredge Components
| PHOTO |
FILE |
DESCRIPTION |
Price |
| |
|
Toyo Pumps |
|
| |
|
Submersible Pumps |
|
| |
|
Pump Power Packs |
|
 |
80512-CED |
MTU 12V 183 TE72 ENGINE With a power rating of 610 Kw @ 2100 rpm . Overhaul reports available.
Engines supplied without gearboxes.
. Australia |
$ 92,650
(US Dollars) |
 |
80506-CPBS |
8 Inch Booster Station The set is in perfect condition.
Impeller and pumphouse are as new.
Built in a 20" Container ( Noise isolation ) . North Germany |
€ 52,800
(euro) |
 |
80436-CED |
MTU 16V 396 ENGINE Completed March 2008
W6 overhaul completed by MTU according to MTU schedules and
delivered with MTU warranty. Delivered with full overhaul report, parts
schedule, dyno test report, and class approval certificate. Australia |
$ 609,000
(US Dollars) |
 |
80311-CPD |
Nijhuis dredging pump Rebuilt Nijhuis dredging pump, 400 mm / 500 mm, complete rebuild with extra spares (2 x impellers + new pumpshaft). Holland |
$ 16,500
(US Dollars) |
.jpg) |
710-8CPD |
18"x 16" Thomas Simplicity pump. |
$ 24,200
(US Dollars) |
 |
710-6CG |
Gear to set is a Lufkin 2:1 |
$ 2,750
(US Dollars) |
.jpg) |
710-5CE |
Caterpillar D399 Engine |
$ 55,000
(US Dollars) |
 |
701-7ED |
Cooper-Bessemer model JS-8-T diesel engine has only test hours since it was completely rebuilt. Over $ 75,000 was spent on the rebuild, which includes a new Elliot turbocharger, but the engine was never returned to service. This low RPM engine will produce 1,800-horsepower (1342 kW) at 500 RPM continuous. Wisconsin, USA. |
$ 55,000
(US Dollars) |
 |
60915OB |
Yamaha 40-horsepower outboard motor has a four stroke gasoline engine and is set up for wheel steering. It was purchased new in 2003 and used on only one job. It has low running hours and in excellent running condition. Dallas area, Texas, USA. |
$ 5,000
(US Dollars) |
 |
60914OB |
Yamaha 50-horsepower outboard motor has a four stroke gasoline engine and a steering handle. It was purchased new in 2003 and used on only one job. It has low running hours and in excellent running condition. Dallas area, Texas, USA. |
$ 6,000
(US Dollars) |
 |
606JU-4 |
Lift
boat/Barge jack up system: This four point jackup leg system
was purchased for a project that was subsequently canceled. None
of the components were ever used, or ever installed. The rack and
pinion jacking system is powered by fully counterbalanced variable
speed hydraulic motors through a specially designed reduction gear. Louisiana, USA |
$ 1,299,700
(US Dollars) |
 |
510DE-2 |
Detroit
Diesel 12V-71 with Twin Disk MG 514 Transmission: Blower,
heat exchanger in expansion tank, no alternator, no starter, no
Jabsco pump. North East USA. |
$ 12,100
(US Dollars) |
 |
509CH-1 |
Dredge
Cutterhead w/ 71-inch (1.778 mm) ID Back ring: Cutter
head includes 8 complete extra sets of replaceable cutter edges. The
cutterhead edges have casting #A6337 and #A6338. New York, USA. |
$ 16,600
(US Dollars) |
 |
509CH-2 |
Dredge
Cutterhead w/ 55-inch (1397 mm) ID Backring: Cutter
Head includes a complete extra set of cutterhead edges. New York, USA. |
$ 7,770
(US Dollars) |
 |
509CH-3 |
Dredge
Cutterhead w/ 43-inch (1092 mm) ID Backring: New York, USA. |
$ 5,500
(US Dollars) |
 |
509CH-4 |
Dredge
Cutterhead w/ 42-inch (1067 mm) ID Backring: New York, USA. |
$ 4,400
(US Dollars) |
|
Hydraulic Dredges
