       |
File 100918-DS
 |
|
5,200 m3 Trailing Suction Hopper Dredge
The vessel was built in 1979 in Japan and was converted to Trailing Suction Hopper Dredge in 2008 in China. The vessels Classification Society is CCS (China Classification Society) International and is ready for inspection and delivery.
Located in China
Price for Dredge: USD $ 11,000,000 |
Technical Details
| Principal Dimensions and Characteristics |
| |
Length Over All: |
135 m
|
443 feet |
| |
Length Between Perpendiculars: |
125 m
|
410 feet |
| |
Molded Beam: |
20 m |
66 feet |
| |
Molded Height: |
11.050 m
|
36 feet |
| |
Draft: |
7.5 m
|
25 feet |
| |
Cargo Capacity: |
5,200 cubic meters |
6,801 cubic yards |
| |
Ship Speed: |
17.50 knots |
| |
Classification Society: |
CCS (China Classification Society) International
|
| |
Service Area: |
Offshore |
| |
Year Built: |
1979 |
| |
Year Rebuilt: |
2008 |
| Dredging Capacity |
| |
Maximum Dredging Depth: |
30 m |
98 feet |
| |
Dredging Speed: |
2 - 3 knots |
| |
Loading Time: |
~60 min |
| Main Engines (2) |
| |
Power: |
4,242 kW x 2 |
5,689 hp x 2 |
| Harrows (2) |
| |
Make/Model: |
DN650 ameliorate type harrow, high pressure |
| |
(9KG/cm3) (Weight of harrow: 10.5t/each; Q’ty 2) |
| Submerge Pump System |
| |
Submerge Pump: (Driven by motor, submerge centrifugal type single shell pump) |
| |
Flow Capacity: |
6,500 cubic meters/hr |
8,502 cubic yards/hr |
| |
Water pressure: |
19 m |
62 feet |
| |
Revolution Rate: |
360 r/min |
| |
Shaft Power: |
550 kW |
738 hp |
| |
Inlet/outlet diameter: |
650 mm |
26 inches |
| Electromotor |
| |
550 kW (738 hp) /690 V /50 Hz /IP68 /F Grade, 375 RPM (2 sets) |
| |
Diesel Engine Power: |
720 kW |
966 hp |
| |
Revolution Rate: |
1,500 r/min (2 sets) |
| |
Generator: |
700 kW (939 hp) /690 V /50 Hz/150 r/min (2 sets) |
Flush Water Pump |
| |
Diesel Engine: Power Ne: |
720 kW (966 hp), revolution rate n: 1,500 r/min (2 sets) |
| |
Generator: |
700 kW (939 hp) /690 V /50 HZ /1,500 r/min (2 sets) |
| |
Flush water pump: |
Q: 1,537.2 m3/h, H: 0.91MPa, n: 1,45 0n/min, ne: 453.5 kw (2 sets) |
Flush Water Pump System |
| |
Electromotor: |
560 kW (751 hp) /690 V /50 Hz /IP68 /F Grade, 1,500 RPM (2 sets) |
Bottom Door |
| |
Whole: |
2,100 mm |
83 inches |
| |
Move length: |
1,000 mm |
39 inches |
| |
Bottom door cylinder: |
220/125 x 1,000 mm (39 inches) |
| |
Newly installed 12 ameliorate type self-balance bottom door for discharge. Bottom door can close off in together or grouping. Each bottom door is controlled by a hydraulic cylinder, and can display and control in bridge room. |
Dredging Device Generator Set |
| |
400 kW (536 hp) /440 V /60 Hz /1,800 r/min (1 set) |
Dredging Monitor System |
| |
Newly installed dredging control system, has been equipped with display of hopper location, load draft device and dredging track inspect system, etc. |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges