       |
File 110906-DS
 |
|
3,500 m3 Trailing Suction Hopper Dredger (TSHD)
This 3,500 m3 Trailing Suction Hopper Dredger (TSHD) was built in Nov., 2005 in China by Jianghai Shipyard. It's Classification Society / Notation is ZC, Sailing area: Great Coastal.
Located in China
Price for Dredger: USD $ 7,145,000 |
Technical Details
| Principal Dimensions and Characteristics |
| |
Length Over All: |
94.68 m
|
311 feet |
| |
Beam: |
16.80 m |
55 feet |
| |
Depth: |
7.10 m
|
23 feet |
| |
Full Draft: |
5.60 m
|
18 feet |
| |
Air Draft: |
3.533 m
|
12 feet |
| |
GRT / NRT: |
3,666 / 1,098 |
| |
Hopper Barge capacity: |
3,500 cubic meters |
4,578 cubic yards |
| |
Year Built: |
2005 |
| |
Classification Society / Notation: |
ZC, Sailing area: Great Coastal
|
| Main Engines (2) |
| |
Make/Model: |
NINGBO ZHONGCE / G6300ZC18B(19B) / (CHINA) |
| |
Power @ 550 RPM |
1,323 kW x 2 |
1,800 hp x 2 |
| Gear Box |
| |
GWC42/45/01 (02) *2, 2.5:1 |
| Propulsion |
| |
Propellers: |
Fixed Pitch Propellers |
| Anchor |
| |
2,460 KG * Ф 44.00 mm x 2 (inches x 2) |
| Slurry Pumps (2) |
| |
Make/Model: |
8300ZCA-6 (Made in China) |
| |
Power @ 500 RPM |
736 kW x 2 |
1,000 hp x 2 |
| Auxiliary Engines (2) |
| |
Make/Model: |
Z6170ZLB (Made in China) |
| |
Power @ 100 RPM |
330 kW x 2 |
450 hp x 2 |
| Generators (2) |
| |
Make/Model: |
CCJF300TW (Made in China) |
| |
Power @ 1,000 RPM (380 V*50 HZ) |
300 kW x 2 |
400 hp x 2 |
| Auxiliary Engine |
| |
Make/Model: |
6135COF (Made in China) |
| |
Power @ 1,500 RPM |
79.4 kW |
100 hp |
| Generator |
| |
Make/Model: |
TFXW-250M4-H (Made in China) |
| |
Power @ 1,500 RPM: |
93.75 kW |
125 hp |
| Auxiliary Engine |
| |
Make/Model: |
4135COF (Made in China) |
| |
Power @ 1,500 RPM: |
53 kW |
70 hp |
| Generator |
| |
Make/Model: |
TFX-255M4-H (Made in China) |
| |
Power @ 1,500 RPM: |
50 kW |
67 hp |
| Main Pumps (2) |
| |
Capacity: |
7,000 cubic meters x 2 |
9,156 cubic yards x 2 |
| |
Power @ 350 RPM |
18 m |
59 feet |
| |
Suction Pipe diameter: |
700 mm |
28 inches |
| |
Discharge Pipe diameter: |
700 mm |
28 inches |
| Dredging Capacities |
| |
Maximum Dredging depth: |
22 m |
72 feet |
| |
Dredging Speed: |
2.2 knots |
| Diesel Pump |
| |
ZCY5/0.33, 5 cubic meters/hr (6.5 cubic yards/hr), 0.33 MPA, 40 mm (1.57 inches) |
| High Pressure Water Spray Pump |
| |
350CS-75, 1,260 cubic meters/hr (1,648 cubic yards/hr), 1,450 RPM * 75 m (246 feet) * 1 |
| Bilge Pump |
| |
100CB265, 100 cubic meters/hr (131 cubic yards/hr), 2,900 RPM, 65 m (213 feet) |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges