Technical Details
| Principal Dimensions and Characteristics |
| |
Length Over All: |
47.57 m
|
156 feet |
| |
Beam: |
9 m |
30 feet |
| |
Depth: |
4 m
|
13 feet |
| |
Draft Max: |
3.5 m
|
11 feet |
| |
Gross Tonnage: |
483 |
| |
Hopper Capacity: |
600 cubic meters |
785 cubic yards |
| |
Speed: |
11 knots in ballast / 8 knots laden |
| |
Classification Society: |
Spanish Registry Group 3 “T” (for ships going to sea) |
| |
Year Built: |
2009 |
| Main Engines (2) |
| |
Make/Model: |
Deutz / B BF12L513C |
| Auxiliary Engines (2) |
| |
Make/Model: |
Deutz / 2011- 110 C |
| Generators (2) |
| |
Make/Model: |
Stanford |
| |
Power: |
380v 220v 50hz |
| Propulsion |
| |
Propellers: |
2 x Schottel SPR 226 |
| Bow Thruster |
| |
Diameter: |
800 mm |
31.5 inches |
| Suction Pump |
| |
Make/Model: |
Warman |
| |
Power @ 500 RPM (Capacity): |
1,500 cubic meters/hr |
1,962 cubic yards/hr |
| Pressure Pump |
| |
Make/Model: |
Zedar |
| |
Power @ 2,000 RPM (Capacity): |
30 kg |
| Winches |
| |
Bow Winches (2) - Wire: |
100 m x 2 |
328 feet x 2 |
| |
Vertical Stern Winches (2) |
| Anchors |
| |
Anchors (2): |
500 kg each with 200 m (656 ft.) of 22 mm (0.87 in.) chain – |
| |
|
400 m (1,312 ft.) rope 100 mm (3.94 in.) |
| Safety |
| |
Outboard rescue boat for 8 people with 50 hp (37 kW) Honda engine. |
| Dredging Equipment |
| |
1 x pressure sensor |
| |
1 x inclinometer |
| |
1 x tide controller with radio modems |
| |
1 x laptop ACIMUT software |
| |
1 GPS double antenna Hemisphere VS 100 |
| Navigation Equipment |
| |
Sound Solas Furuno FE 700 |
| |
Navtex Furuno NX-700B Solas 518,490 4209,5 KHZ |
| |
RTF MF/HF +LSD Sailor 1,6-27,5MHZ |
| |
2 x RTF VHF Sailor SP 3520 156-174 MHZ |
| |
A.I.S. Furuno FA 150 156-162 MHZ |
| |
RBLS COSPAS SARSAT Sailor SGE406-II GPS 406,028/121,5 MHZ |
| |
RADAR NO-SOLAS Furuno FAR 2117BB 9410 MHZ |
| |
SART SERPE-IESM KANNARD RESCUER 9200-9500 MHZ |
| |
GPS SOLAS Furuno GP 150 |
| Hydraulic Crane |
| |
Make/Model: |
ATLAS / 255.2 with winch |
| |
Lifting capacity: |
9 tonne lifting capacity at 5 m (16 ft.) distance at 250 bar. |
| |
Winch (Make/Model): |
CARCO / P60 |
| |
Capacity: |
16 tonnes at 250 bar. |
| |
Depth from 0-20 m (0- 66 ft.) with Hydraulic Grabber for 1,000 liters (264 gallons). |
| Extra Information |
| |
Maximum split open 3.5 m (11 ft.). Presently fitted for 1.8 m (6 ft.) (2 opening & closing cylinders of |
| |
500 mm (20 in.) diameter. |
| |
It is ready for trailing dredging for depth up to 30 m (98 ft.). Presently, it is dredging with a suction pipe on |
| |
the bow, as it is doing jobs in depths of no more than 10 m (33 ft.). |
| |
It could dredge and pump directly but distance is unknown as Owners never used it for such purpose. |
| |
It is presently trading in South Europe dredging sand. |
| |
No discharge pump is included in the sale. |
| |
She is suitable to fit 2 big cranes on port side or a big central one with rails along the hopper. |
| |
However, for central crane, the central loading pipe for suction should be dismounted. |
| |
The vessel is, in general, built to be able to fit any type of crane subject to stability. |
| |
It can be loaded at max capacity (600 cbm) in about 35 minutes but it will depend on the type of soil |
| |
and product to dredge. |
Hydraulic Dredges
