       |
File 704-1DGH
 |
|
Clamshell Loading Hopper Dredger
Bottom Dumping Hopper
This Clamshell Loading, Bottom Dumping Hopper Dredger was built in the 70'ies by Drypool Engineering out of galvanized steel. The hull fitted with heavy duty rectangular fending above and below the waterline. She was dry docked for painting in August, 2007. She is newly classed and flagged.
The hopper is fitted with 60 cm grid screens for debris retention. The dredged material is discharged via eight (8) hydraulically operated doors
Mooring equipment comprises of twin drum winches fore and aft. There is also an extra drum for a stern anchor.
Located in The Mediterranean
Available for Charter
Price for Dredger: EUR € 880,000
Price for adding a 16-inch pump for trailing suction and lance dredging and shore pumpout: EUR 135,000 |
General Specifications
| Principal Dimensions and Characteristics |
| |
Length Over All: |
45.66 m |
150 feet |
| |
Beam: |
10.36 m |
43 feet |
| |
Load line Draft: |
4.60 m |
15 feet |
| |
Lightship Draft (Fwd): |
2.40 m |
7.9 feet |
| |
Lightship Draft (Aft): |
3.00 m |
9.8 feet |
| |
Gross Tons: |
628 |
|
| |
Net Tons: |
224 |
|
| |
Flag" |
Sierra Leone |
| |
Classification |
Phoenix Register of Shipping, Valid until 8013 |
| Dredging Capacity |
| |
Dredger Crane |
Priestman Lion HD350 |
| |
Dredging Depth (max) |
17 m |
56-feet |
| |
Grab Capacity Sand/Silt |
1.20 cubic meters |
1.57 cubic yards |
| |
Grab Capacity Mud |
2.20 cubic meters |
2.88 cubic yards |
| |
Hopper Capacity : |
600 tonnes |
|
| Propulsion |
| |
Engine Make/Model: |
Brons / GV12 |
| |
Power @ 350 RPM : |
820 kW |
1,100 hp |
| Hull Construction |
| |
Material: |
Galvanized Steel |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2005 |
Hydraulic Dredges