| PHOTO |
FILE |
DREDGE DESCRIPTION |
PRICE |
 |
100901-DH |
10" Sand Dredge: This is a Catamaran style cutter head dredge, it has a lever room 8’ x 8’ foam insulated and air conditioned and all guards and handrails in place. It is ready for inspection and delivery.
Located in The State of Nebraska, USA |
$225,000
(US Dollars) |
 |
100828-DH |
800 mm (32 inch) Cutter Suction Dredger: This Dredger was built in May, 2007 in China. Its
Classification Society is CCS (Domestic) and its Class Notation is the Chinese great coastal area.
Located in China |
¥ 165,000,000
(China RMB) |
 |
100825-DH |
4 x 6 inch VMI MD-415 Auger Cutter Dredge: This Dredge was built in 1973 & reconditioned by prior owner and was purchased by the current owner on 02/25/2009. It can be hauled on a drop deck trailer no permit required.
Located in The State of Louisiana, USA |
$ 55,000
(US Dollars) |
 |
100823-DH |
400 mm (16 inch) Cutter Suction Dredger: This Dredger can be regarded as a new built machine, the only original part is the center hull section which has been rebuilt, and a Ellicott Bucket wheel Cutter which is refurbished with new Hagglunds drive motors. (Not for sale in Australia) Located in Australia |
$ 2,600,000
(US Dollars) |
 |
100820-DH |
VMI MD-415 Augger Dredger: This Augger Dredger only has 4,200 hours on it. From the A/C unit down, everything works, It is in great working order, with no leaks or breaks. Located in The State of Texas, USA |
$ 80,000
(US Dollars) |
 |
100809-DH |
10 x 8 Wolverine Dredge: This Dredge is ready for inspection and delivery.
Located in Mexico |
$ 250,000
(US Dollars) |
 |
100806-DH |
12 x 10 Shaw Chain Ladder Dredge: This Shaw Dredge was built 1986, the Operator cab was replaced in 11/03 and the Hull was sand blasted and repainted with cold tar in 10/03.
Located on the East Coast, USA |
$ 235,000
(US Dollars) |
 |
100734-DH |
8 inch Jet Suction Dredge: This Dredge is Brand new and was built in 2009 in China. The price includes an on-board-motor and 500 m of discharge pipe.
Located in China |
$ 185,000
(US Dollars) |
 |
100730-DH |
6 inch Jet Suction Harbor Dredge: This dredger was designed and built for maintenance dredging in small boat harbors. It is easily transportable by trailer. Located in The State of Wisconsin, USA |
$ 98,000
(US Dollars) |
 |
100725-DH |
450 mm Cutter Suction Dredger: This Dredger was built in 1982 in Ankerloekken Glommen Verft, Fredrikstad, Norway. It was rebuilt and modified in 1995 at Vegsund Slip, Aalesund, Norway. The dredger has been used for dredging of uncompacted materials in harbors.
Located in North Norway |
8,300,000
(NOK) |
 |
100717-DH |
MC-10 Mud Cat with Trailer: The unit is an MC-10 1980 model. This dredge has had quite a bit of work done to it. New foam in side tanks, fuel tanks cleaned and fixed, new hydraulic tank, etc... Very nice and clean unit. Located in The State of Washington, USA |
$ 110,000
(US Dollars) |
 |
100709-DH |
700 mm Suction Dredger: This Dredger was built on February 10, 1994. The Dredger is ready for inpsection and delivery.
Flag: R.O.C. (Republic of China flag) - Located in Taiwan |
$ 3,500,000
(US Dollars) |
 |
100702-DH |
800 mm Bucket Wheel Dredger: This Dredger was built in 2009 in China and its
Classification society is ZC (Chinese coastal). Located in China |
$ 19,200,000
(US Dollars) |
 |
100701-DH |
6" Auger Suction Dredger H&H Model MDS-120-6: This Dredger has New paint, gauges, auger bearing, hydraulic hoses, hydraulic fluids, and diesel engine head. Located in The State of Texas, USA |
$ 89,000
(US Dollars) |
 |
100517-DH |
Ellicott 370 10 inch Dredge: This is a 1999 reconditioned Ellicott 370 Dredge. It is available for inspection and delivery.
Located in The State of Mississippi, USA |
$ 384,000
(US Dollars) |
 |
100508-DH |
12 inch Cutter Suction Dredger: This Dredger was built in 1995 in Japan. The Owner wants to sell her enblock c/w one unit 240 hp Anchor Boat built in 1993 by Miura Shipyard Co., LTD and 400 m of dredge pipeline. Located in Malaysia |
$ 3,640,000
(Singapore Dollar) |
 |
100416-DH |
Ellicott 670 14-inch Dredger: This is an Ellicott 670 "Dragon" model hydraulic pipeline dredge. Located in The State of Virginia, USA |
$ 990,000
(US Dollars) |
 |
100415-DH |
8" H&H Dredge: This Champion Dredge would be easily adaptable to help in the clean up in the marsh area's in the gulf- Works well in shallow water - very stable- has I hydraulic winch mount in the front deck. Located in The State of Illinois, USA |
$ 98,800
(US Dollars) |
 |
100407-DH |
8 inch (254 mm) Auger Suction Dredge VMI 815 CS: This Dredge is in good working condition and is ready for inspection and delivery.
Located in Mexico |
$ 175,000
(US Dollars) |
 |
100401-DH |
Ellicott 370 Bucket Wheel Cutter Dredge: This Dredge was built in 1999.
Located in Mexico |
$ 355,000
(US Dollars) |
 |
100369-DH |
20 inch Cutter Suction Dredger: This Dredger was built in 1956 at Old Day Dry Dock in Florida and was remodeled in 1987. Flag: St Kitts and Nevis
- Located in The West Indies |
$1,750,000
(US Dollars) |
 |
100361-DH |
VMI MD 415 Auger Dredge: The MD-415 is the ideal small dredging machine. If you have needs where a larger dredge would be uneconomical to use, then the MD-415 is the machine for you. This Dredge was recently refurbished. Located in the State of Texas, USA |
$ 110,000
(US Dollars) |
 |
100356-DH |
IHC Beaver 3300 - 26 inch Dredger: This Dredger was built in 1976. Its last dry docking and major maintenance was done in the summer of 2006.
Located in the Mediterranean |
€ 2,600,000
(euro) |
 |
100354-DH |
10 inch IMS 4010 Horizontal Auger Dredge: This 10-inch (254 mm) horizontal dredge in good mechanical condition and was recently painted. It is ready for inspection and delivery. Located in Mexico |
$ 95,000
(US Dollars) |
 |
100339-DH |
8 inch Cutter Suction Dredge: It is configured to dredge 26 feet deep. Easily shortened to dig 17 feet deep.
It has a booster pump on a barge behind the dredge. Goes with the dredge.
Comes with pipeline, rigging and everything needed to make a complete dredging plant. Located in Midwest, USA |
$165,000
(US Dollars) |
 |
100335-DH |
8 inch VMI MD-815 Dredge: This Dredge was built in 2004 and comes with extra cable & PVC pipe. The new impeller machine has minimal overall use with less than 1,400 total hours. It is perfect operating condition. Also available separately low boy trailer.
Located inthe State of Florida East Coast, USA |
$ 139,900
(US Dollars) |
 |
100331-DH |
Minerals Mining Dredge: The dredge was produced in the mid 1980’s and has been fully restored to like new condition in July, 2010. The dredge is ready to go to work, in the gulf or as part of a mining operation or cleaning a river; the dredge is up to the task. Located in the State of Indiana, USA |
$ 325,000/Dredge
$ 555.000/
Support Equip.
(US Dollars) |
 |
100222-DH |
New Build 8 inch Cutter Suction Dredger: This Dredger is newly built and is ready for inspection and delivery.
Located in China |
$ 300,000
(US Dollars) |
 |
100221-DH |
IMS 7012 - 12 inch Auger Dredger: The Model 7012 HP Versi-Dredge was built in 2007, it is ideal for rivers, lakes, beach projects, port projects, and production sand mining. It has less than 1,300 hrs and was recently fully serviced. Located in Belize City |
$ 325,000
(US Dollars) |
 |
100219-DH |
8 inch Swinging Ladder Dredge: This Dredge was Constructed throughout the Winter of 2007 – 2008 and was delivered March 15th 2008. The front workings of the dredge were serviced and repaired in owners shop due to wear signs. The machine has just been serviced by Caterpillar and is ready for transport and work. Located in The State of Colorado, USA |
$ 325,000
(US Dollars) |
 |
100215-DH |
14" x 14" Dixie Dredge Model CS-2-14: This is a 14 " Portable Hydraulic Cutter Suction Dredge. It was built in 1974 by The Dixie Dredge Corporation.
Located in The State of Louisiana, USA |
$ 205,000
(US Dollars) |
 |
100214-DH |
14" x 16" Ammco Dredge Model PD14S: This Dredge was built in 1975.
Located in the State of Louisiana, USA |
$ 425,000
(US Dollars) |
 |
100101-DH |
6 inch Open Suction Dredger: This Dredge is a Suction Dredge only, it has 52 low original hours.
Located in the State of North Carolina, USA |
$ 70,000
(US Dollars) |
 |
91225-DH |
12 inch Cutter Suction Dredger: This Dredger was built in 2009. Located in Northern Europe |
€ 275,000
(euro) |
 |
91216-DH |
8 inch H&H Auger Suction Dredge: This Dredge is believed to have built in 1999 and it is an H&H rig made by Gulf Atlantic Pump & Dredge. It is in excellent condition with the pump motor still having a factory warranty. Located in The State of North Carolina, USA |
$ 87,000
(US Dollars) |
 |
91213-DH |
SP815 Mud Cat Dredger: This Mud Cat Dredger Model # SP815 was built in 1985 and was recently rebuilt with 10 hours testing time since rebuild.The cab has Air Conditioning and is in working order. This Dredger is Fully Operational and ready to go. Located in The State of Illinois, USA |
$ 135,000
(US Dollars) |
 |
91212-DH |
Diesel Powered Pithog Dredge: This is a remote controlled 4" LWT PitHog that has been converted from electric over hydraulic to diesel over hydraulic. Located in The State of Washington, USA |
$ 60,000
(US Dollars) |
 |
91205-DH |
12 inch Dredger: Located in Latvia |
€ 110,000
(euro) |
 |
91203-DH |
"New Building" 800 mm Cutter Suction Dredger: This Dredger is under construction now and delivery time is May, 2010. Located in Korea |
$ 14,800,000
(US Dollars) |
 |
91201-DH |
14 inch Floating Dredge "Model Irene 350": This Dredge was built in 1993 and was completely overhauled 2005.
Located in Italy |
€ 415,000
(euro) |
 |
91117-DH |
18 inch Cutter Suction Dredger: This Dredger was built in 1984 in Bordeaux, France. Its Classification Society is Bureau Veritas. This vessel is in very good condition.
Located in The East Mediterranean Area |
€ 2,120,000
(euro) |
 |
91116-DH |
Nessie Dredge and Tandem Trailer: This Nessie Dredge model # N8DX was built in 2004. It is in good working condition and comes with a Hydraulic tilt - 2 axle - 8 wheel tandem trailer.
Located in The State of Florida (West Coast), USA |
$ 200,000
(US Dollars) |
 |
91113-DH |
Ellicott Series 800 Dredger: This Dredger was built in 1982 and was refurbished in 2009. This Dredger offers both portability and power - the series 800 "Dragon" design criteria features rapid dismantling, mobility, re-assembling and start-up minimizing downtome and ensuring high productivity. Located in Colombia |
$ 810,000
(US Dollars) |
 |
91107-DH |
14 inch Cutter Suction Dredger: This Dredger was built in october of 2009 and is ready for inspection and immediate delivery. Located in China |
$ 832,000
(US Dollars) |
 |
90936-DH |
8" Cutterhead Nessie Dredge: This is a Nessie - Model 8DXT 8" Cutterhead Dredge. It was built in 2004 and is in fairly new condition. The dredger only has 750 dredging hours .
Located in the state of New Jersey, USA |
$ 295,000
(US Dollars) |
 |
90817-DH |
12 inch Cutter Suction Dredger: his Dredger was built in October, 2001 and only has approximately 1,200 total runtime hours. It has a RINA navigability certificate and comes with 1,000 m (3,280 feet) of Pipeline.
Located in Austria |
€ 555,000
(euro) |
 |
90807-DH |
24 inch Electric Cutter Dredge: The vessel is a cutter head type dredge. Located in The State of Florida, USA |
$ 9,200,000
(US Dollars) |
 |
90724-DH |
14 inch Dixie Dredge: This Dixie dredge has a 16" intake by 14" discharge, it has approx. 450 hrs on the Thomas pump and was rebuilt with a new impeller and liner. Located in The State of Texas, USA |
$ 475,000
(US Dollars) |
 |
90717-DH |
"New Building" 18 inch Cutter Suction Dredger: This is for a New Building of a Cutter Suction Dredger and
will be built upon Buyers' request. It comes with a Reconditioned Caterpillar engine but can be purchased with a new engine on request. Located in Ireland |
€ 1,100,000
(euro) |
 |
90532-DH |
10 inch Cutter Head Suction Dredge: This Dredge is fully operational and comes with New 10" steel pipe, 12 - 40' Quick connect sections and used plastic pipe, 12- 10", 40' sections. Pipe floats are also included.
Located in The State of Indiana, USA |
$ 295,000
(US Dollars) |
 |
90518-DHCS |
500 mm (20-inch) Cutter Suction Dredger: This dredger was built in 1989 in Tczew, Poland. With 1,200 kW (1,609 hp) main pump, engine and 14 m (46-feet) dredging depth. This Dredge is not dismountable; it must be towed or shipped by barge. Poland |
PLN 1,890,000
(Zloty) |
 |
90515-DH |
24 inch Cutter Suction Dredge: This Dredge was built in 1972. In 2006, all aspects of the hull were inspected, gauged and returned to compliance as when it was built. Mexico |
$ 1,600,000
(US Dollars) |
 |
90514-DH |
3,500 m3 Cutter Suction Dredger: This Dredger was built in Jan. 1995 in Japan, it was imported by Chinese in Sep., 2007. Its Classification Society is ZC and it's navigation area is Offshore.
Flag: China
Located in North China |
$ 11,000,000
(US Dollars) |
 |
90411-DH |
10 inch Discharge Ellicott 370 Dredge: This Dredge is ready for inspection at any time. Mexico |
$ 345,000
(US Dollars) |
 |
90410-DH |
16" x 16" Kenner Dredge: This Dredge was built in 1982. This dredge comes in a 16" x 16" configuration, with a new pump. Mexico |
$ 850,000
(US Dollars) |
 |
90335-DH |
10 inch Discharge Ellicott 370 Dredger: This Dredge is ready for inspection at any time. Mexico |
$ 385,000
(US Dollars) |
 |
90325-DH |
300 mm Bucket Wheel Dredge: As is where is, loaded on truck, the unit is completely transportable by road. Dredge is available for inspection and delivery.
Built: 1993 Belgium |
€ 173,000 (euro) W/O Cutter & Spuds
€ 217,000 (euro) With
Cutter & Spuds
|
 |
90207-DH |
12 inch (300 mm ) Hydraulic Cutter Dredge: This Dredge was built in 1986 and was completely rebuilt in 2006. France |
€ 286,000
(euro) |
 |
90204-DH |
12 inch (305 mm) Portable Cutter Dredge: This "D224" Dredge is a professionally built sectional hull cutter dredge of welded steel construction throughout. It was built in 1954 by the Allied Builders Ltd. This dredge has never been in salt water and is in full operating condition. North Western Canada |
$ 239,000
(US Dollars)
Will Consider All Offers |
 |
90133-DH |
406 mm (16 inch) IHC Electric Cutter Suction Dredger "Electric Dredge": This Dredger was built in 1974 in IHC; Holland and was rebuilt in 1988. It is classed: Maritime Administration Certificate until 03/2009. This Dredger requires electricity from the shore or from a generator barge to operate.
Located in Iceland |
€ 1,365,000
(euro) |
 |
90120-DH |
760 mm (30 inch) Cutter Suction Dredger: This Dredge was built in 1997 in Japan, it was rebuilt in 2006 in Korea. China |
$13,000,000
(US Dollars) |
 |
81206-DH |
10 inch Dixie Dredge: This Dixie Dredge has been modified to accept either a ladder or submersible Toyo Pump. Ladder is 95 ft long. Can be disassembled and easily transported on flat bed trucks. State of Texas, USA |
$ 209,000
(US Dollars) |
 |
81103-DH |
3,500 m3 Non-Propelling Cutter Suction Dredger: This CSA Cutter Suction Dredger is a Non-propulsion dredger and is currently dredging within the Coastal Area. Navigation area: Offshore Built : May, 2007 Flag: China South China |
$ 21,200,000
(US Dollars) |
 |
81063-DH |
10 inch Cutter Suction Dredge: As is where is, loaded on truck, the unit is completely transportable by road. The underwater part was recently new coated. Dredge is available for delivery as of January, 2009. Built: 1993 North Europe |
€ 223,000
(euro) |
 |
81031-DH |
14" x 12" Complete CSD Package: This dredger comes with 8000' of 16 " Pipeline, a 12-inch Booster Pump and a Dredge Tender. The dredge has completed a navigation channel and reclimation of 38.8 acres for a housing project in Belize City. Located: Belize |
$1,065,000
(US Dollars) |
 |
81025-DH |
12 inch Kenner CSD: Dredge has a new Shell and Impeller (Hull Mounted). New Suction Pipe on a 40 ft Ladder, with a Kyb Hydrostar Cutter head Motor. State of California, USA |
$ 365,000
(US Dollars) |
 |
81001-DH |
377 mm (14.7 inch) CSD - 2200 m3/hr Water: China |
$ 978,500
(US Dollars) |
 |
80901-DH |
12 x 12 Aluminum Dredge: This custom built aluminum dredge was built for getting into urban lake jobs where weight is a major factor. The dredge is all new and still lacks the swing and hoist winches, although the hydraulic valves, lines, and fair leads are all installed for the winches. State of Kansas, USA |
$ 485,000
(US Dollars) |
 |
80707-DH |
26 inch IHC Cutter Suction Dredger: This dredger was built in 1977 by I.H.C. Holland and was rebuilt in 1994 and in March, 2009 it has undergone major refurbishment. This vessel will be available by mid July, 2009. It comes with 1000 meters of new floating Pipe, and 1,000 meters of new shore Pipe and also comes with new hose. Pakistan |
$ 4,000,000- Dredge
$ 400,000 - Pipe & Rubber Hoses
(US Dollars) /
Also For Charter |
 |
80509-DHCS |
10 inch IMS 4010 Horizontal Auger Dredge: Well maintained dredge. Ready to go to work. Never used in salt water. Regular fluid changes at 250hr. intervals and regular repair of all worn components. State of Utah, USA
|
$ 107,000
(US Dollars) |
 |
80218-DHCS |
300 mm (12 inch) Cutter Suction Dredger: This Cutter Dredge was built in 2006 in Turkey but was basically never used. Owner says that the dredge may need maintenance. Turkey |
$ 255,000
(US Dollars) |
 |
80216-DHCS |
10 inch New W&S Wolverine Dredge: This will be a new 10” dredge and will be ready to ship by June 2008, possibly sooner. State of Michigan, USA |
$ 405,000
(US Dollars) |
 |
80205-DHCS |
24 x 20 IHC Cutter Suction Dredge: This dredge just finished a job in Mexico and is undergoing general maintenance. It is available for inspection and sale. Will not be available for long as the owners are awaiting some contracts. "Price includes a traveling Spud Barge" Located in Mexico |
$ 1,650,000
(US Dollars) |
 |
80204-CSA |
10 inch IMS 7012 Dredge Dredge: Just finished its last job and has been overhauled and repainted. ready for its new assignment. Mexico |
For Lease
in Mexico Only |
 |
703-11DAE |
6 inch Remote Controlled Electric Dredge: Ideal for dredging sludge ponds, drainage ditches, septic tanks, lagoons and many similar projects. The dredger is in excellent condition, and includes thousands of dollars worth of spare parts and Support Equipment. State of Nebraska, USA. |
$ 52,000
(US Dollars) |
 |
609-21CS |
24 inch DMI Hydraulic Dredge: This dredge is currently being rebuilt, and will be in top flight condition when delivered. Vessel will receive a new dredge pump, new piping, wiring, controls, hydraulics, etc. Engines will be rebuilt (new engines optional). State of Kansas, USA. |
$ 5,450,000
(US Dollars) |
Hydraulic Dredges