       |
File 100214-DH
 |
|
14" x 16" Ammco Dredge Model PD14S
This Dredge was built in 1975.
Located in the State of Louisiana, USA
Price for Dredge: USD $ 482,000 |
Technical Details
| Principal Dimensions and Characteristics |
| |
Center Section: |
| |
Length: |
10.7 m
|
35 feet |
| |
Width: |
3.05 m |
10 feet |
| |
Depth: |
1.52 m
|
5 feet |
| |
Side Section: |
| |
Length: |
18.3 m
|
60 feet |
| |
Width: |
1.52 m |
5 feet |
| |
Depth: |
1.52 m
|
5 feet |
| |
Side Section: (Ext.) |
| |
Length: |
3.05 m
|
10 feet |
| |
Width: |
1.52 m |
5 feet |
| |
Depth: |
1.52 m
|
5 feet |
| Spuds |
| |
Length: |
19.2 m |
63 feet |
| |
Diameter: |
4.88 m |
16 inches |
| Ladder |
| |
Length: |
18.9 m |
62 feet |
| |
Width: |
2.74 m, 0.762 mm |
9 feet, 2-1/2 inches |
| |
Depth: |
914 mm |
36 inches |
| |
New suction pipe, new Thomas Twin 16" Jet with new body and nozzles and a new bell mouth. |
| Main Engine |
| |
Make/Model: |
Caterpillar / 3412DITA |
| |
Power @ 1,800 RPM |
559 kW |
750 hp |
| |
Runtime Hours: |
700 hours from New |
| Auxiliary Engine |
| |
Make/Model: |
Caterpillar / 3406DITA |
| |
Power @ 1,800 RPM |
280 kW |
375 hp |
| |
Runtime Hours: |
500 hours from Factory remanufactured engine |
| Dredge Pump |
| |
Make/Model: |
Thomas / N-40 |
| |
Size: |
356 mm x 406 mm |
14 inches x 16 inches |
| |
Impeller diameter: |
1,016 mm |
40 inches |
| |
No. of Valves |
4 |
| |
300 hours on this rebuilt pump with a new shell, new liners, new impeller, new shaft and new bearings. |
| Auxiliary Pump |
| |
Make/Model: |
Gardner Denver |
| |
Size: |
2-BL |
| Jet Pump for the Thomas Venturi |
| |
Make/Model: |
Goulds / 341OL |
| |
Size: |
203 mm x 254 mm x 432 mm |
8 in. x 10 in. x 17 in. |
| |
Total Runtime hours: |
10 / 12 months |
| Auxiliary Generator |
| |
Make/Model: |
Winpower / FM12V4-C |
| |
Power @ 1,800 RPM |
12 kW |
16 hp |
| |
120 / 240 V 1 Phase |
| Winches (3) |
| |
Make/Model: (2) |
Gearmatic / 1102-SCXBP |
| |
Make/Model: (1) |
Gearmatic / 1102-SEC |
| Spud Cylinders |
| |
Make/Model: |
Sheffer / 6HHRF30CRAK |
| |
Size: |
152 mm x 762 mm |
6 inches x 30 inches |
| Hydraulics |
| |
Cutter Pump: |
| |
Make/Model: |
Vicker / 45V60-11A-IOL |
| |
Swing & Ladder Pump: |
| |
Make/Model: |
Commercial / P37X 378 BY ITI5-7 B ITI5-1 |
| |
Cutter Motor: |
| |
Make/Model: |
Staffa / B-200 |
| Anchors |
| |
Make/Model: (2) |
Danforth |
| |
Weight: |
400 lbs |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges