Dredges and Dredging Equipment
Dredge Brokers HomeList your Dredge or Equipment (Free)Dredge Brokers Terms of UseDredge Brokers Privacy PolicyFrequently Asked QuestionsHow To Contact Dredge Brokersfiller

File 100215-DH

14" x 14" Dixie Dredge Model CS-2-14
More Photos

14" x 14" Dixie Dredge Model CS-2-14

This is a 14 " Portable Hydraulic Cutter Suction Dredge. It was built in 1974 by The Dixie Dredge Corporation.

Located in The State of Louisiana, USA

Price for Dredge: USD $ 240,000
Technical Details
Principal Dimensions and Characteristics
  Year Built:      1974
  Length Over All: 30.5 m
 100 feet
  Beam Over All: 6.71 m 22 feet
  Depth: 1.52 m
 5 feet
  Center Section:
  Length: 11.6 m 38 feet
  Width: 3.05 m 10 feet
  Depth: 1.52 m 5 feet
  Side Section:  
  Length: 16.8 m 55 feet
  Width: 1.83 m 6 feet
  Depth: 1.52 m 5 feet
  Side Section: (Ext.)  
  Length: 3.05 m 10 feet
  Width: 1.83 m 6 feet
  Depth: 1.52 m 5 feet
Spuds
  Length: 19.2 m 63 feet
  Diameter: 457 m 18 inches
Ladder
  Length: 19.2 m 63 feet
  Width: 2.74 m 9 feet
  Depth: 9.14 m 30 feet
  New Thomas Twin 14" Jet, New bell mouth, New suction pipe.
  Includes an additional open suction ladder with Thomas Twin Jet system.
  Gear Reducer:
  Make/Model: Winsmith / 61HM
  Cutter Shaft:
  Length: 1.83 m, 235 mm 6 feet, 9-1/4 inches
  Diameter: 95 mm 3-3/4 inches
  Cutter:
  Size: (I. D.) 800 mm 31-1/2 inches
  No. of Blades: 6 LH
  Jet:
  Make/Model: Thomas Twin
  Size: 356 mm 14 inches
Main Engine
  Make/Model: Detroit / 16V-71T
  Power @ 2,100 RPM 559 kW 750 hp
P. T. O.
  Make/Model: Rockford / PTA-1/2 1827-D
Auxiliary Pump
  Make/Model: Gardner denver
  Size: 76 mm x 102 mm BL 3 in. x 4 in. BL
Reduction Gear
  Make/Model: Foote Jones
  Ratio: 3 to 1
Dredge Pump       
  Make/Model: Thomas / N-40
  Size: 356 mm x 356 mm 14 inches x 14 inches
Auxiliary Engines (2)
  Make/Model: Auxiliary Engine (1) Detroit / 8V-71
  Power @ 2,100 RPM 242 kW 325 hp
  Make/Model: Auxiliary Engine (2) Caterpillar / D 3306T
  Power @ 2,000 RPM 168 kW 225 hp
Hydraulics    
  Cutter Pump:
  Make/Model: Vicker / 45V60A11A10
  Swing and Ladder Pump:
  Make/Model: Commercial / P37X398BYJC25-7BJC20-1
  Cutter Motor:
  Make/Model: Vicker / 45M155A
Jet Pump    
  Make/Model: Goulds / 3405
  Size: 152 mm x 203 mm x 432 mm 6 in. x 8 in. x 17 in.
Winches       
  Swing:
  Make/Model: Braden / M9K-18/ M37X
  Ladder:
  Make/Model: Braden / M-S-10/ M37X
Spud Cylinders 
  Make/Model: Lynair
  Size: 178 mm x 914 mm 7 in. x 36 in.

All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.

Go to Top
DredgeBrokers © 2007
Dredge Brokers Design by thewritersforhire.com