       |
File 100221-DH
 |
|
IMS 7012 - 12 inch Auger Dredger
The Model 7012 HP Versi-Dredge was built in 2007, it is ideal for rivers, lakes, beach projects, port projects, and production sand mining. The Starwheel Drive system allows the dredge to be completely self-propelled. It has less than 1,300 hrs and was recently fully serviced, including re-building of all pumps and cleaning all systems (hydraulics), filters and new oil. The Dredger is currently Dry Docked and is ready to go back into service. The current owner purchased it new, it has never been abused. No pipe or floats.
Located in Belize City
Price for Dredger: USD $ 325,000 |
Technical Details
| Principal Dimensions and Characteristics |
| |
Length Over All: |
15.7 m |
51.5 feet |
| |
Width: |
3.66 m |
12 feet |
| |
Height: |
3.2 m |
10.5 feet |
| |
Weight: (less fuel) |
21,410 Kg |
47,200 lbs |
| Flotation |
| |
Pontoons: |
| |
Two (2) pontoons: |
1,143 mm x 1,092 mm x 11,887 mm |
45 in. x 43 in. x 468 in. |
| |
10 ga. steel sides and bottom w/ 1/4" diamond deck; internal bulkheads and stiffeners; and painted w/ a
marine grade epoxy-urethane paint. |
| |
Displacement: |
27,400 kg |
60,500 lbs. |
| |
Draft: |
889 mm |
35 inches |
| Dredging Capacity |
| |
Dredging Depth: |
9.1 m |
30 feet |
| |
Cut: |
135 in. (3,430 mm) wide x 26 in. (660 mm ) deep |
| Engine |
| |
Make/Model: |
John Deere Diesel / 6135HF070 (6 cylinder) |
| |
Power : |
317 kW |
425 hp |
| |
Fuel Capacity: |
1,516 liters |
400 gallons |
| |
Fuel Consumption: |
79.4 liters/hr |
20.6 gallons/hr |
| Hydraulic Systems |
| |
Circuit #1: (Slurry Pump): |
7.9 in3/rev. 80 gpm (5.05 liter/sec.) @ 5,500 psig |
| |
Circuit #2: (Cutterhead, Boom, Winches and Starwheels) |
7.9 in3/rev. load sense, 72 gpm (4.54 liter/sec.) @ 2,500 psig |
| |
Reservoir: |
454 liters |
120 gallons |
| |
Filtration: |
(one) 1 tank mounted return filter with a 10 micron (min.) rating with a indicator & cab warning light. Slurry pump circuit remote charge filter 6-micron (min.) rating with an indicator & cab warning light. Filter with water removal capability are optional. |
| Dredge Pump |
| |
Make/Model |
GIW Cast Iron/LCC-M 250-660 |
| |
Discharge Diameter: |
254 mm |
10 inches |
| |
Suction Diameter: |
304 mm |
12 inches |
| |
Impeller Diameter: |
660 mm |
26 inches |
| |
Pump Performance: |
5,000 gpm (315 liter/sec) @ 125 ft. (38.1 m) |
| |
|
TDH (slurry s. g. 1.25) @ 760 rpm w/2,000 ft (609 m) discharge length |
| |
Speed (variable): |
0 tp 760 rpm |
| Cutter Head |
| |
Diameter: |
660 mm |
26 inches |
| |
Length: |
3,430 mm |
135 inches |
| |
Replaceable hardened steel excavator blades; available with paddlebar for materials that are easily slurried. |
| |
Drive: |
Recessed dual hydraulic motor; direct drive with no gear reduction. |
| |
Speed (variable): |
0 to 95 RPM @ 2,500 psi |
| |
Torque: |
23,885 in-lbs (2,969 N-m) @ 2,500 psi (peak) |
| |
Cutter Tip Force: |
1,837 lbs. (8,171 N) |
| Controls |
| |
Electronic joystick controls are provided in a climate controlled cab. |
| Propulsion |
| |
Make/Model: |
Starwheel* Drive Self-Propulsion system; cable drive optional.
Starwheels* are individually operated for high maneuverability. |
| |
Speed (variable): |
0 to 15 RPM (starwheel drive) |
| |
|
0 to 55 fpm (cable drive) |
| Electric System |
| |
Voltage: |
12 volt, negative ground |
| |
Alternator Output: |
130 Amp |
| Corrosion Protection |
| |
Standard paint: |
Superstructure and hull are sandblasted and painted with two coats of marine epoxy suitable for saltwater service. A self healing zinc clad undercoating is applied to above deck surfaces. The cab is made with galvaneal steel. Submerged surfaces are top coated with two coats of anti-fouling paint. Average paint thickness is 12 mils minimum. |
| Cathodic Protection |
| |
Standard |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges