Technical Details
| Principal Dimensions and Characteristics |
| |
Length Over All: (+ ladder) |
36.58 m
|
120 feet |
| |
Over All Width: |
9.14 m |
30 feet |
| |
Ladder Length: |
15.54 m
|
51 feet |
| |
Draft: (MLW) |
1.83 m
|
6 feet |
| |
Fuel Capacity: |
75,708 liters
|
20,000 gallons |
| |
Pipeline: |
5,000 feet (1,524 m) of 21.6 in. (549 mm) HDPE SDR 15.5 |
| |
Year Built: |
1956 |
| |
Year Remodeled: |
1987 |
| |
Last Dry Dock: |
2007 |
| Main Engine |
| |
Make/Model: |
EMD / 16-567 |
| |
Power: |
1,193 kW |
1,600 hp |
| Pump |
| |
20 inch Georgia iron Works Pump |
| |
Suction: |
508 mm DIPS - 549 mm |
20 in. DIPS - 21.6 inches |
| |
Discharge: |
508 mm DIPS - 549 mm |
20 in. DIPS - 21.6 inches |
| Main Generator |
| |
Make/Model: |
General Electric powered by 12-567 EMD |
| |
Power: (1,100 KV) |
895 kW |
1,200 hp |
| Crank Shaft / Motor |
| |
Cutter shaft diameter: |
203 mm |
8 inches |
| |
Cutter Motor: (power) |
149 kW |
200 hp |
| Dredging Capacity |
| |
Maximum Dredging Depth: (MLW) |
11.58 m |
38 feet |
| |
Minimum Dredging Depth: (MLW) |
2.29 m |
7.5 feet |
| |
Maximum Swinging Width: |
60.96 m |
200 feet |
| |
Minimum Swinging Width: |
30.48 m |
100 feet |
| Other Equipment |
| |
HYPAC GPS Computer Control System 2009 |
| Comprehensive Spare Parts Inventory |
| |
(2) Two - Impellers for main dredge pump (one new, one used) |
| |
(2) Two - Liners for main dredge pump |
| |
(1) One - Main pump back door |
| |
(1) One - Main pump front door |
| |
(1) One - Dredge Block |
| |
(1) One - Main Dredge Pump Housing |
| |
(2) Two - Clutches for main pump |
| |
(2) Two - E.M.D. water pumps |
| |
(1) One - E.M.D. Reconditioned governor |
| |
Assorted E.M.D. spare parts |
| |
(1) One - High pressure service water pump |
| |
1/2 - Drum cutter teeth |
| |
(1) One - Rock Cutter - rebuilt |
| |
(2) Two - Sand Cutters |
| |
(1) One - 21” Main pump suction hose |
| |
(1) One - 21” Dresser coupling |
| |
(1) One - 20’ x 21” Discharge hose |
| |
(1) One - 20’ x 21” Suction hose |
| |
(2) Two - 12,000 lb anchors |
| |
(2) Two - Anchor Buoys |
| |
(1) One - 25’x10’x3’ pipeline pontoon barge (322002) |
| |
(3) Three - Power Packs for main engines |
| |
(3) Three - Bull gears for hauling winches |
| |
(2) Two - Drums for hauling gear |
| |
(1) One - 110 Volt fuel pump |
| |
(2) Two - Spuds 62’ x 28” |
| |
(1) One - 100 kW (134 hp) Caterpillar Generator (51103) |
| |
(2) Two - 2’’ Submersible pump |
| |
(2) Two - Heavy duty grease guns |
| |
(1) One - Airless paint sprayer |
| |
Assorted air filters |
| |
Assorted fuel filters |
| |
Assorted spare parts |
| |
(2) Two - 24 volt alternators |
| |
(4) Four - 4D 12 volt batteries |
| |
(2) Two - 8D 12 volt batteries |
| |
500 lb Electrodes |
| |
(28) Twenty-Eight - 1’’ Drive impact sockets (assorted sizes) |
| |
(20) Twenty - ¾’’ Drive impact sockets (assorted sizes) |
| |
(1) One - Bearing puller kit |
| |
(2) Two - Heavy duty 8’’ angle grinders |
| |
(1) One - Presser washer |
| |
(2) Two - 24 volt Battery chargers |
| |
(1) One - Kit assorted hand tools |
| |
(1) One - 1’’ Drill press |
| |
(1) One - ½’’ Hand drill |
| |
(1) One - ¾’’ Hand drill |
| |
(6) Six - Pipe wrenches (assorted sizes) |
| |
(2) Two - 15 hp Electric motors |
| |
(1) One - 7.5 hp Electric motor |
| |
(1) One - 5 hp Electric motor |
| |
500 Assorted nuts & bolts |
| |
Assorted threaded pipe fittings |
| |
(5) Five - 2 ton Chain hoists |
| |
(3) Three - 1 ½’’ Rachet come-a-long |
| |
(1) One - 3’’ Gasoline pump |
| |
(60) Sixty - Rachet chain binders |
| |
Anchor weld-on pipe fittings |
| |
(1) One - Third lung & accessories |
| |
(1) One - Cutting torch set |
| |
(3) Three - Bottles oxygen |
| |
(2) Two - Bottles acetylene |
| |
(1) One - Electric ½’’ drive impact wrench |
| |
(2) Two - 1’’ drive Pneumatic impact wrench |
| |
(1) One - ½’’ drive Pneumatic impact wrench |
| |
Assorted electrical spare parts |
| |
350 gallons lube oil |
| |
3000 gallons diesel fuel |
| |
(1) One - 17 ft Carolina Skiff with 15 hp (11 kW) outboard motor |
Hydraulic Dredges
