       |
File 100823-DH
 |
|
400 mm (16 inch) Cutter Suction Dredger
This Dredger can be regarded as a new built machine, the only original part is the center hull section which has been rebuilt, and a Ellicott Bucket wheel Cutter which is refurbished with new Hagglunds drive motors. The CSD has new built side pontoons, A Frame, Crane, Spud Carrier Unit, new Caterpillar 3412, new Marine Gearbox and a new GIW 400 mm Dredge Pump, Also has been fitted with all new Hydraulic Pump Valves, Spud Rams, Alloy Wheelhouse, Operators Desk and complete new Ladder.
Located in Australia
Price for Dredger: USD $2,600,000
(Not for sale in Australia) |
Technical Details
| Principal Dimensions and Characteristics |
| |
Hull Length: |
32 m
|
105 feet |
| |
Hull Width: |
8 m |
26 feet |
| |
Working Draft: |
1.5 m
|
5 feet |
| |
Total Weight Assembled: |
Approx 135 tonnes |
| Main Engine |
| |
Make/Model: |
Caterpillar / 3412 |
| |
Power (Total Installed): |
895 kW |
1,200 hp |
| Propulsion |
| |
Impeller (4 Blades): |
950 mm |
37 inches |
| Dredging Capacity |
| |
Dredging depth: |
|
| |
Minimum: |
1.5 m
|
5 feet |
| |
Standard: |
12 m
|
39 feet |
| |
Modified Maximum: |
15 m
|
49 feet |
| Dredge Pump |
| |
Maximum Pumping Distance (Sand): |
1,000 m |
3,281 feet |
| |
Suction Pipe Diameter: |
400 mm |
16 inches |
| |
Discharge Pipe Diameter: |
400 mm |
16 inches |
| Cutter |
| |
Power: |
201 kW |
270 hp |
| |
Rotary Diameter: |
1,500 mm |
59 inches |
| |
Rose Diameter: |
1,200 mm |
47 inches |
| |
Bucket Wheel Diameter: |
2,000 mm |
79 inches |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges