       |
File 101109-DH
 |
 |
|
VMI MD-415 Horizontal Cutter Dredge
This Dredge was built in 1990 and has 2,655 hours on it, everything is in good working condition, no leaks or breaks. It comes from a local Water Department. The price does not include the trailer.
Located in The State of California, USA
Price for Dredge: USD $ 72,000 |
Technical Details
| Principal Dimensions and Characteristics |
| |
Length Over All: |
10.21 m
|
33.6 feet |
| |
Height: (without A/C) |
2.44 m |
8 feet |
| |
Width: |
2.59 m
|
8.6 feet |
| |
Draft: |
559 mm
|
22 inches |
| |
Weight: (approx.) |
9,100 kg
|
20,000 lbs |
| |
Fuel capacity: |
606 liters |
160 gallons |
| Main Engine |
| |
Make/Model: |
B 5.9TAA-P173 |
| |
Power @ 2,500 RPM |
129 kW |
173 hp |
| Pump |
| |
Type: |
Hi-chrome cast iron, centrifugal, recessed impeller |
| |
Impeller: |
457.2 mm |
18 inches |
| |
Suction: |
101.6 mm |
4 inches |
| |
Discharge: |
152.4 mm |
6 inches |
| |
Capacity: |
95 mm |
3.75 inches |
| |
Sphere - Variable to 1,000 GPM (3,785 L/min)
|
| |
(water @ 68°F) @ 130 feet (39.6 m) head @ 1,400 RPM |
| Cutter Assembly |
| |
Type: |
Horizontal with full-width, flow-through suction (Paddle and cutting teeth available) |
| |
Size: (width x diameter) |
2.59 m x 533.4 mm |
8.6 feet x 21 inches |
| |
Speed Variable: |
80 RPM (forward and reverse) |
| |
Torque: |
3,429 N∙m |
30,348 in-lbs. |
| |
Operating Depth Variable to 15' (4.57 m) maximum (optional depths available upon request) |
| Pontoons |
| |
Two (2) Pontoons: |
812.8 mm x 863.6 mm x 9.30 m |
32 in. x 34 in. x 30.6 ft. |
| |
10 gauge steel, integral bulkheads and stiffeners, formed for rigidity, cora-foam filled |
| Propulsion |
| |
Type: |
Treble sheave hydraulic winch |
| |
Traverse Speed Variable 0-50 ft/min (0-15.2 m/min) |
| |
Cutting Speed 0-15 ft/min (0-4.57 m/min) |
| Hydraulic System |
| |
Pumps: (3) |
variable displacement, axial piston |
| |
Pump: (1) |
fixed displacement |
| |
Motors: |
fixed displacement |
| |
Capacity Total: |
80 GPM (302.8 L/min) @ 2,200 RPM |
| |
Reservoir: |
378.5 liters |
100 gallons |
| Drive |
| |
Hydraulic pump drive, direct from engine |
| Filters |
| |
Protected hydrostatic loop, high pressure suction & return |
| Relief Settings |
| |
Centrifugal Pump: |
4,000 psi (276 bar)
|
| |
Cutter Head: |
3,000 psi (207 bar) |
| |
Accessories: |
3,000 psi (207 bar) |
| |
Boom: |
1,500 psi (103 bar)
|
| Electrical system |
| |
Alternator Output: |
100 amp |
| |
Battery Heavy Duty: |
12 volt |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges