       |
File 110316-DH
 |
|
800 mm (32-inch) Cutter Suction Dredger
This Cutter Suction Dredger was rebuilt in 06/2008 by a builder in Korea.
Located in China
Price for Dredger: USD $ 21,450,000 |
Technical Details
| Principal Dimensions and Characteristics |
| |
Length Over All: |
89.45 m
|
293 feet |
| |
Molded Beam: |
17.00 m |
56 feet |
| |
Molded Depth: |
4.80 m
|
16 feet |
| |
Draft: |
2.80 m
|
9 feet |
| |
GRT: |
1,520
|
| |
Year Rebuilt: |
2008 |
| |
Average working capacity: |
1.5 - 1.6 Million cubic meters/Mth |
2.0 - 2.10 Million cubic yards/Mth |
| |
Maximum working capacity: |
1.9 Million cubic meters/Mth |
2.5 Million cubic yards/Mth |
| |
Accommodation: |
Crew beds : 24 beds |
| Dredger Capacity |
| |
Dredging depth @ 45 degree: |
25 m |
82 feet |
| |
Suction Pipe diameter: |
900 mm |
35 inches |
| |
Discharge Pipe diameter: |
800 mm |
31 inches |
| |
Discharge capacity (approx.): |
15,000 cubic meters/hr |
19,619 cubic yards/hr |
| Main Engine |
| |
Make/Model: (Made in 2000) |
MITSUBISHI / 16KU30A |
| |
Power @ 750 RPM |
5,287 kW |
7,090 hp |
| |
Fuel type: |
Bunker-A |
| |
Air Compressor: |
20 cubic meters/hr (26 cubic yards/hr) X 2.5 MPA
7.4 kW (10 hp) X 210 V/50 HZ CAPA:800L |
| Main Generator |
| |
Make/Model: (Made in 1997) |
MITSUBISHI / 16KU30A |
| |
Power: |
5,000 kW |
6,705 hp |
| |
Fuel type: |
Bunker-A |
| Auxiliary Generator |
| |
Made in 2002 |
| |
Power: |
537 kW |
720 hp |
| Main Pump |
| |
Make/Model: |
Single Suction Centrifugal Type-D/Casing (Japanese Product/Korea OEM) |
| |
Capacity / Total head (approx.): |
15,000 cubic meters/hr x 93 m |
19,619 cubic yards/hr x 305 feet |
| |
Bearing Type: |
Taper Roller Bearing (340 x 50 x 4) |
| |
Discharge distance (Max): |
6,000 m |
19,685 feet |
| |
Reducer (Made in Korea): |
2.2:1 |
| Ladder Pump |
| |
Make/Model: |
Single Suction Centrifugal Type-S/Casing (Japanese Product/Korea OEM) |
| |
Capacity / Total head (approx.): |
15,000 cubic meters/hr x 30 m |
19,619 cubic yards/hr x 98 feet |
| |
Bearing Type: |
Taper Roller Bearing |
| |
Reduction Gear type: |
Chain - Gear |
| |
Reduction Ratio: |
2.64:1 |
| |
Max. Output: |
1,864 kW |
2,500 hp |
| |
Drive Motor (Exchange): |
2,500 kW (hp)/ 6,600 V/ 60 HZ |
| Cutter |
| |
Variable Speed type: |
0~30 RPM |
| |
Motor for Cutter: |
Direct Current |
| |
Reducer: |
33.5:1 |
| Other |
| |
Locator: |
DGPS |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges