       |
File 110811-DH
|
|
1998 IMS 4010 Auger Dredge
This is self propelled horizontal cutter head dredge.
Located in Canada
Price for Dredger: CDN $ 187,000 (Canadian Dollars) |
| Principal Dimensions and Characteristics |
| |
Length
|
11.37 m
|
37 feet |
| |
Width
|
2.84 m
|
9 feet |
| |
Height
|
3.14 m
|
10 feet |
| |
Weight |
17,000 lbs. |
7,711 Kg |
| Main Engines |
| |
Make / Model |
Cummins Diesel ModeI5BTA5.9 |
| |
Power @ 2,500 rpm |
129.75 kW |
175 hp |
| |
Cylinders |
6 |
| |
Fuel Capacity |
175 gallons |
662 liters |
| Flotation |
| |
Pontoons |
Four (4) pontoons, 34 in. x 34 in. x 144 in.
|
| |
|
12 Ga steel sides with 10 ga bottom,
internal bulkheads and stiffeners
epoxy coated inside and outside. |
| |
Displacement
|
2O,500 lbs
|
9,298 Kg |
| |
Draft |
508 mm |
20 inches |
| |
Working Capacity Cut
|
96 in. Wide X 22 in. Deep |
| |
Working Depth |
6.7 m |
22 feet |
| Hydraulic Systems |
| |
Pump |
A Variable Displacement, Axial Piston
Hydraulic Pump and a Fixed
Displacement Hydraulic Pump. |
| |
Capacity |
100 gpm @ 2,000 psig |
| |
Reservoir |
24 liters |
65 gallons |
| |
Filtration |
100% return flow through a 10 micron filter
and 5% of flow through a secondary 1
micron filter with water removal capability. |
| |
Circuit#1 |
Dredge Pump |
| |
Circuit#2 |
Cutter head, Boom, Winches and
Starwheels |
| |
Relief Valve Settings |
Dredge pump 2,500 psig
Accessories 2,900 psig |
| Cutter head |
| |
Cutter bar |
|
| |
Diameter
|
558.8 mm |
22 inches |
| |
Length |
2.43 m |
8 feet |
| |
Drive |
Recessed hydraulic motor. Direct drive
with no gear reduction. Cutter bar end
opposite of the drive motor is supported
by an oil lubricated tapered roller bearing. |
| |
Speed |
Variable to 187 rpm |
| |
Torque |
12,000 in-lbs. |
83.74 mPa |
Dredge Pump
|
| |
Type
|
IMS
|
| |
Discharge Diameter
|
254 mm
|
10 inches |
| |
Suction Diameter
|
247.65 mm
|
9.75 inches |
| |
Impeller Diameter
|
438.15 mm
|
17.25 inches |
| |
Sphere Passage
|
152.4 mm
|
6.0 inches |
| |
Pump Performance |
4,000 gpm @ 80 ft. TDH (water) @ 975 rpm |
Others
|
| |
Controls |
Electronic joystick controls are provided
in a heated, air conditioned cab. |
| |
|
| |
Propulsion |
STARWHEEL Drive Self-Propulsion
system
STAR WHEELS are individually operated
for high maneuverability |
| |
|
| |
Electrical System |
|
| |
Voltage |
12 volt, negative ground |
| |
Alternator Output |
130 Amp |
Technical Details
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Website Design by thewritersforhire.com |
Hydraulic Dredges