Dredges and Dredging Equipment

File 111233-DH

20-inch CSD - IHC 1600 "Beaver"
More Photos
GA Plan
Specifications Page

20-inch CSD - IHC 1600 "Beaver"

This Dredge was built in 2006 and is Classification Society is BV (Bureau Veritas), valid until September 1, 2016. A brand new spud carrier was installed 5 months ago while the dredge underwent full dry dock maintenance and class renewal for 5 years.

Flag: Saudi Arabia

Located in Saudi Arabia

Price for Dredge: EURO € 2,145,000


Technical Details
Principal Dimensions and Characteristics
  Length - with Ladder over all: 33.20 m
109 feet
  Length over pontoons:    22.00 m
72 feet
  Beam: 7.95 m 26 feet
  Depth: 2.46 m
8 feet
  Draft: 1.70 m
feet
  Gross Tonnage: 159 tonnes
  Classification Society:                 BV (Bureau Veritas)
  Year Built: 2006
  Main pontoons:   13.00 x 2.95 x 2.46 m 43 x 9.7 x 8.07 feet
  Side pontoons: 20.00 x 2.44 x 2.44 m
66 x 8.05 x 8.05 feet
  Mean draft with full bunkers approx:   15.00 m 49 feet
  Total dry weight approx:   145 tonnes
Dredging Capacity  
  Maximum standard dredging depth:   14.00 m 46 feet
  Internal diameter of suction pipe:   550 mm 22 inches
  Internal diameter of discharge pipe: 500 mm 20 inches

Dredge Pump  

  Make/Model: IHC-1250-275-500, double walled
  Power at shaft:   935 kW 1254 hp
  Prime mover (Make/Model): CATERPILLAR / 3512 B-SCAC  
  Power:   967 kW 1297 hp
Auxiliary Power
  Make/Model: CATERPILLAR / 3406 CJWAC   
  Power: 350 kW 469 hp
Electrical Installation         
  Voltage:  24 V  DC
  Battery capacity:   440 Ah
  Voltage: 230/400 V  AC
  Installed electrical power:   12.50 KVA

Cutter  

  Make/Model: IHC 10-CB-AL-1455-180  
  Power:   170 kW 230 hp
  Diameter:  1,455 mm 57 inches
  Max speed:  30 rev/min

Winches (Ladder Winch / Swing Winches)         

  Line pull, 1st layer:   100/90 Kn
  Max line speed approx:   20/20 m/min
  Wire diameter:  24/24 mm 0.94/0.94 inches
  Drum diameter:  445/445 mm 17.5/17.5 inches
  Hall winches have independent hydraulic drive.
  The two swing winches are supplied with wires of 100 m (328 ft.) and anchors of 720 Kg (1,587 lbs).
Spuds  
  Length (approx):   18.50 m 61 feet
  Diameter: 559 mm 22 inches
  Weight (approx):   5,250 Kg 11,574 lbs

Spud Hoisting Rams         

  Force: 254 Kn
  Ram stoke:  2.10 m 7 feet
  Spud stoke (approx): 3.35 m 11 feet
Deck Crane         
  Lifting power:  30 kN 
  Outreach: 3.25 m 10.6 feet

All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.


Go to Top
DredgeBrokers © 2007
Dredge Brokers Design by thewritersforhire.com