       |
File 711-10DHHC
 |
|
|
IMS 4010 Horizontal Cutter Dredge
This self propelled horizontal cutter dredge is in full operating condition. The hydraulic motor that drives the dredge pump, together with the bearings have been replaced with new (cost USD 4,000). 1,717 total runtime hours. The trailer is a drop deck semi trailer, not just a utility trailer. Dredge comes with a brand new cutterhead with aggressive teeth, and two standard paddle wheel cutters in addition to the cutter that is mounted.
Located in the State of Iowa, USA
Price for Dredger: USD 170,000
Price for Trailer: USD 6,000
|
Technical Details
| General |
| |
Length: |
38 ft 6 in |
11,7m |
| |
Width: |
9ft 7 in |
2,9m |
| |
Height: |
9 ft 4 in |
2,8m |
| |
Weight: |
22,000 lbs |
9,979 kg |
| Flotation Capacity |
| |
Pontoons (2) |
|
|
| |
Width |
35 in |
889mm |
| |
Height: |
36 in |
965mm |
| |
Length: |
309 in |
7,848mm |
| |
Displacement: |
22400lbs |
10,160 kg |
| |
Draft: |
30 in |
762mm |
| Working Capacity: |
| |
Cut: |
|
|
| |
width: |
96 in |
2438mm |
| |
depth: |
22 in |
559mm |
| |
Working depth: |
20 ft |
6,1m |
| Engine: |
| |
Make: |
Cummins 6 cylinder, 5.9 L |
| |
Power: |
177 Hp |
237kW |
| |
Fuel Capacity |
180 Gal |
454 liters |
| Cutterhead |
| |
Diameter: |
22 in |
559mm |
| |
length: |
96 in |
2438 mm |
| Dredge Pump |
| |
Type: |
IMS |
| |
Impeller: |
10 in |
254mm |
| |
Discharge Diameter: |
10 in |
254 mm |
| |
Impeller Diameter: |
19.5 in |
495mm |
| |
Sphere Passage: |
6.0 in |
152mm |
| |
Pump |
3000 gpm@70 ft@118- RPM |
189 liter/sec@ 21,3 TDH@118- RPM |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Website Design by thewritersforhire.com |
Hydraulic Dredges