This 4-inch horizonatl dredger is in good running condition and can be inspected at any time.
Located in The State of Texas USA.
Price for Dredger: US$ 75,350.00
Technical Details
General
Length:
10.21 m
33'6 ft.
Height:
2.44 m
8'0" ft. with Cab
Width:
2.60 m - 2.74
8'6" ft. transport - 9' working
Weight:
9,071 Kg
20,000 lbs
Draft:
0.59 m
22 in.
Fuel Capacity:
605.49 Liters
160 US Gallons
Working Capacity
Cut:
2.60m
8'6"
Operating Depth:
Variable to 4.57m
Variable to 15"
Propulsion:
Treble sheave hydraulic winch
Traverse Speed:
0 -1 5.24 MPM
Variable 0-50FPM
Average Cutting Speed:
0 - 4.57 MPM
0-15 FPM
Engine
Type:
Cummins
Model:
B5.9-174
Power:
174 BHP @ 2500 RPM
Pontoons
10 gauge steel with integral bulkheads and stiffeners, formed for rigidly and corofoam filled.
Dimensions:
Two 9.75m x 10.36m x 9m
Two 32" x 34" x 29'6"
Cutter Assembly
Diameter:
5.48m x 3m with full width flow through suction
18" x 8'6" with full width flow through suction
Speed:
Variable 0-120 RPM forward and reverse
Dredge Pump
Type:
Hi-Chrome, centrifugal, recessed impeller
Impeller:
33cm
13 in.
Suction:
10.16 cm
4"
Discharge:
10.16 cm
4"
Capacity:
Variable to 1000 GPM @ 130' head (water @ 68 degrees F) @ 1750 RPM
Hydraulic System
Cutter Head:
Bucket Wheel
Pumps:
Variable Displacement, Axial Position
Motors:
Fixed Displacement
Capacity:
Total, 80 GMP @ 2200 RPM
Reservoir:
170.29 liters
45 US Gal
Filters : Protected Hydrostatic Loop Hi Pressure Suction and return
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
Si usted prefiere hablar español, contacte por favor
a Wilhelm von Mayer aqui.
Für kontakt auf Deutsch, bitte melden Sie sich mit Herr Wilhelm von Mayer hier.