       |
File 712-1DHHC
 |
Self Propelled IMS 4010
10 Inch Horizontal Cutter Suction Dredger
This 10-inch (254 mm) horizontal dredge is in full running condition and ready to go to work.
Located in Israel
For Sale outside of Israel only
Price for dredger: US$ 210,600
|
Technical Details
| Principal Dimensions and Characteristics |
| |
Length: |
38 ft 6 in |
11.7 m |
| |
Width: |
9 ft 7 in |
2.9 m |
| |
Height: |
9 ft 4 in |
2.8 m |
| |
Weight: |
22,000 lbs |
9,979 Kg |
| Flotation |
| |
Two (2) pontoons |
|
|
| |
Width: |
35 in |
889 mm |
| |
Height: |
38 in |
965 mm |
| |
Length: |
309 in |
7,848 mm |
Steel Sides and bottom w/ 1/4" diamond deck; internal bulkheads and stiffeners; and coal tar based TNEMEC paint on the outside
|
| |
Displacement |
22,400 lbs |
10,160 Kg |
| |
Draft |
30 in |
762 mm |
| |
Capacity |
2100 Kw |
|
| Working Capacity |
|
| |
Cut: |
|
|
| |
Wide: |
96 in |
2,438 mm |
| |
Deep: |
22 in |
559 mm |
| |
Working Depth: |
20 ft |
6,.1 m |
| Engine |
|
| |
Make/Model |
John Deere Diesel/6068HF475, 6 cylinder |
|
| |
Capacity |
180 gal |
681 L |
| Cutterhead |
|
| |
Cutter bar |
|
|
| |
Diameter |
22 in |
559 mm |
| |
Length |
96 in |
2,438 mm |
Replaceable hardened steel excavator blades available with paddle bar for materials that are not easily slurried
|
| |
Drive |
Recessed dual hydraulic motor; direct drive with no gear reduction |
| |
Speed |
90 rpm@2,500 PSI |
|
| |
Torque@2,500 PSI |
1960 in-lbs |
1,475 N-m |
| Dredge Pump |
|
| |
Type |
IMS |
|
| |
Discharge Diameter |
10 in |
|
| |
Suction Diameter |
10 in |
|
| |
Impeller Diameter |
19.5 in |
|
| |
Sphere Passage |
6 in |
|
| |
Pump Performance |
3000 GPM @ 70 ft |
189 liter/sec @ 21.3 m |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Website Design by thewritersforhire.com |
Hydraulic Dredges