       |
File 90807-DH
 |
|
24 inch Electric Cutter Dredge
The vessel is a cutter head type dredge complete with side pontoons, centerline machinery unit, an electrical cable reel, a square bow, a notch stern with ladder, and a steel superstructure with the lever room and control room a top. Although not normally a portable dredge, the components can be disassembled for portability.
Located in The State of Florida, USA
Price for Dredge: USD $ 9,200,000 |
Technical Details
| Principal Dimensions and Characteristics |
| |
Length Over All: |
51.8 m
|
170 feet |
| |
Registered length: |
36.6 m |
120 feet |
| |
Beam registered: |
9.75 |
32 feet |
| |
Depth registered: |
2.13 m
|
7 feet |
| |
Displacement tons: |
425 long tons
|
| Hull |
| |
The hull consists of five each individual pontoon units comprising each of two port and starboard pontoons. Additionally the hull is fitted with two centerline pontoons covered by the steel superstructure. |
| Main Pump |
| |
Make/Model: |
24 X 24 GIW Electric Motor - With a 300 hp (224 kW)jet assist. |
| |
Power: |
2,200 kW |
2,950 hp |
| Ladder and Cutter Head |
| |
The ladder is constructed of steel " H" beam and angle iron. It has an overall length of 72 ft (22 m) plus a 20 ft (6 m) extension. Contained on the ladder is a 600-HP (447 kW) 1,000 hp (746 kW) electric over hydraulic cutter head and motor. The ladder is maneuvered by means of electric over hydraulic winches. |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges