       |
File 91110-DH
 |
|
3 inch Crisafulli Flump Dredge
This is a remote-controlled dredge by SRS Crisafulli, Inc. and was built in 2001 or 2002. It is used for safe, easy removal of settled wastes, including biosolids, raw sewage, sludge, and more. Its structural steel framework and lightweight construction make it durable and easy to transport. It works well in small ponds or lagoons where conventional dredges won't fit.
This dredge has just been rebuilt with the following:
- new traverse motor
- seals on pump
- rebuilt cutterhead
- rebuilt control panel
- new umbilical cord
Located in The State of Indiana, USA
Price for Dredge: USD $ 32,000 |
Technical Details
| Principal Dimensions and Characteristics |
| |
Length Over All: |
5.33 m
|
17.5 feet |
| |
Length Pontoons: |
4.57 m |
15 feet |
| |
Width Pontoons: |
2.13 m
|
7 feet |
| |
Height Over All: |
1.32 m
|
4.5 feet |
| |
Weight: (approx) |
1,361 kg
|
3,000 lbs |
| |
Draft: |
0.30 m |
1 feet |
| Pump Motor |
| |
Power: |
14.9 kW |
25 hp |
| Cutterhead |
| |
Cutterhead width: |
1.22 m |
4 feet |
| |
Cutterhead torque: |
622 Nm |
5,500 in.-lbs |
| |
Cutterhead drive: |
Single |
| |
Cutting teeth: |
Hardened steel |
| Dredging Capacity |
| |
Dredging depth: |
0 to 2.43 m |
0 to 8 feet |
| |
Width of dredge cut: |
0.91 m |
3 feet |
| |
Dredging speed: |
.91 - 4.57 m/min |
3 - 15 ft/min |
| Sludge Pump |
| |
Type: |
3 inch S-series |
| |
Pump / Dredge discharge: |
0.12 x 0.16 mm |
3 x 4 inches |
| Electrical Power |
| |
230/460 VAC, 3 Ph, 60Hz |
| Pontoons |
| |
Foam filled, 12 gage steel |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges