       |
File 91213-DH
 |
|
SP815 Mud Cat Dredger
This Mud Cat Dredger Model # SP815 was built in 1985 and was recently rebuilt with 10 hours testing time since rebuild. The cab has Air Conditioning and is in working order. This Dredger is Fully Operational and ready to go.
It also comes with the following equipment and pipe:
- Tri-Axel Dredger Trailer
- Additional Semi Trailer (Box Style)
- 260 Linear Feet of Flex Pipe
- 308 Linear Feet of Straight Pipe
Located in The State of Illinois, USA
Price for Dredger: USD $ 135,000 |
Technical Details
| Principal Dimensions and Characteristics |
| |
Length Over All: |
9.47 m
|
31.1 feet |
| |
Width Over All: |
2.44 m |
8.0 feet |
| |
Height Over All: |
2.73 m
|
8.95 feet |
| |
Weight: |
13,200 lbs dry
|
| |
Draft: |
559 mm
|
22 inches |
| |
Fuel capacity: |
379 liters
|
100 gallons |
| |
Year Built: |
1985 (recently rebuilt with 10 hours testing time since rebuild) |
| Flotation |
| |
Pontoons: |
Two (2) - 32" x 32" x 25' (813 mm x 813 mm x 8 m)12 -Gauge Steel with Internal Bulkheads and Stiffeners; formed for rigidity; polyurethane foam filled. |
| Cutter Assembly |
| |
Auger: |
| |
Diameter: |
229 mm |
9 inches |
| |
Pitch: |
229 mm |
9 inches |
| |
Flighting: |
9.53 mm |
3/8 inches |
| |
Speed: |
Variable to 89 RPM |
| |
Cutter Knives: |
Detachable Heat-Treated Blades |
| |
Auger Torque: |
11,000 in. lbs. (nominal) |
| |
|
12,000 in. lbs. (peak) |
| Mud Shield: |
| |
14 " x 8' Adjustable position |
| Working Capacity |
| |
Cut 8' wide x 18 " maximum depth |
| |
Operating depth: (maximum) |
4.57 m |
15 feet |
| Engine |
| |
Make/Model: |
Detroit Diesel 4-53T / 5043-8301 w/N-65 injectors |
| |
Power @ 2,100 RPM |
119 kW |
160 hp |
| Drive Engine |
| |
Engine: |
Direct Hydraulic Dual Pump Drive |
| Pump |
| |
Centrifugal Recessed Impeller |
| |
Impeller Diameter: |
305 mm |
12 inches |
| |
Suction Diameter: |
152.4 mm |
6 inches |
| |
Discharge Diameter: |
152.4 mm |
6 inches |
| |
Nominal Pump Performance: |
1,000 GPM against 100 feet Head (water) @ 1,600 RPM |
| |
Lead in Screw (optional) |
| Hydraulic System |
| |
Variable Displacement, Axial Piston, Hydraulic Pump |
| |
Fixed Displacement Hydraulic Motor |
| |
Total Capacity: |
67.6 GPM @ 2,100 RPM (engine speed) |
| |
Reservoir: (at full mark) |
114 liters |
30 gallons |
| |
Circuit One: |
Auger Drive, Boom, Mud Shield and Winch |
| |
Circuit Two: |
Centrifugal Pump Drive |
| |
Relief Valve Setting: |
| |
Auger and accessories:
|
2,000 PSI |
| |
Centrifugal Pump:
|
3,750 PSI |
| Propulsion |
| |
Treble sheave Hydraulic Winch (9" Drum Winch optional)* |
| |
Traverse speed: |
32 FPM Maximum Forward & Reverse |
| |
Average cutting Speed: |
8 to 12 FPM |
| Electrical System |
| |
Voltage: |
12 V |
| |
Alternator Output: |
42 Ampere |
| |
Battery: |
12 V, 205 Ampere Hour |
All details on these pages are given in good faith
and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose
is either stated or implied. Prices are subject to change without notice.
|
|
|
| DredgeBrokers © 2007 |
| Dredge Brokers Design by thewritersforhire.com |
Hydraulic Dredges