Dredge Brokers - Used Dredgers (Dredges) For Sale


IMS 4010 Versi-Dredge w/447 Runtime Hours

IMS 4010 Versi-Dredge w/447 Runtime Hours

This dredge has been gone through rigorously. It has had complete preventative maintenance service along with replacing of all wear parts, hydraulic hoses and all pumps have been re-built or replaced. This dredge has 447 runtime hours and is turn-key.

Location: Ohio
Select Your Currency
Price in Seller's Preferred Currency
USD 143,000
Price in Your Preferred Currency
USD 143,000
* Approximate; see Terms of Use

Technical Details

Principal Dimensions and Characteristics
  Length: 11.37-m 37-feet
  Width: 2.84-m 9-feet
  Height: 3.14-m 10-feet
  Draft: 508-mm 20-inches
  Weight: 7,711-kg 17,000-pounds
  Displacement: 9,298-kg 25,000-pounds
Dredging Capacities
  Dredging Depth: 6.7-m 22-feet
  Width of Cut: 2,438-mm 96-inches
  Depth of Cut: 559-mm 22-inches
Dredge Pump
  Make: IMS
  Discharge Diameter: 254-mm 10-inches
  Suction Diameter: 247.65-mm 9.75-inches
  Impeller Diameter: 438.15-mm 17.25-inches
  Sphere Passage: 152.4-mm 6-inches
  Pump Performance @ 975 RPM: 4,000 gpm @ 80 feet (24 m) TDH (water)
  Make / Model: Cummins Diesel / Model I5BTA
  Type: 6-cylinder, 5.9-liter diesel
  Power @ 2500 RPM: 129.75 kW 175 hp
  Fuel Capacity: 662 liters 175 gallons
  Starwheel Drive┬« Self-Propulsion System: Starwheels┬« are individually operated for high maneuverability
  Cable Drive system for dredging using a conventional anchor / cable system
  Type: Cutter Bar
    Diameter: 558.8-mm 22-inches
    Length: 2.43-m 8-feet
  Drive: Recessed hydraulic motor; direct drive with no gear reduction
  Speed: Variable 0 to 187 rpm
  Torque: 83.74 mpa 12,000 in-lbs
Electrical System
  Voltage: 12-Volt, Negative ground
  Alternator Output: 130 Amp
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright © 2018