Dredge Brokers - Used Dredgers (Dredges) For Sale


12-inch Horizontal Cutter Dredge, IMS 7012

12-inch Horizontal Cutter Dredge, IMS 7012

This Horizontal Cutter Dredger IMS 7012 HP Versi-Dredge was built in 2013, delivered in 2014. It is in general very good condition and has only 1,297 working hours on it. Last maintenance was in 2015, and replacement of exposed hydraulic hoses is recommended. The dredge head cutter is modified with more robust hydraulic motors from Poclain Hydraulics. The IMS7012 has been initially modified for side thruster implementation, but installation is not completed as today.

It has been stored inside for the last two years. The last 2 projects performed, were in freshwater working at lake restoration projects and in non-polluted sediments.

Location: Norway
Select Your Currency
Price in Seller's Preferred Currency
USD 500,000
Price in Your Preferred Currency
USD 500,000
* Approximate; see Terms of Use

Technical Details

Principal Dimensions and Characteristics
  Length Over All: 51-feet 5 inches 15.70 m
  Width: 11-feet 8-inches 3.60 m
  Height Over All: 10-feet 5-inches 13.20 m
  Working Draft: 35-inches 889 mm
  Dry Weight: 49,000 lbs 22,226 kg
  Year Built: 2013
International Shipping Dimensions
  Length with Starwheel ™ Removed 49-feet 2 inches 15 m
  Length with Starwheel ™ Arms Removed 44-feet 10-inches 13.7 m
  Width: 11-feet 8-inches 3.60 m
  Height w/ Muffler and Air Cleaner Removed 10-feet 0-inches 13.1 m
  Shipping Weight (est) 50,000 lbs 22,680 kg
  Plus One (1) Standard 20-foot ISO Container    
Dredging Capacities
  Dredging Depth: 30-feet 9.10 m
  Width of Cut: 126-inches 3,200 mm
  Nominal Depth of Cut: 26-inches 660 mm
Dredge Pump
  Make: Georgia Iron Works (GIW) Cast Iron
  Suction Diameter: 12-inches 305 mm
  Discharge Diameter: 10-inches 254 mm
  Max. Sphere Passage: 5-inches 127 mm
  Performance (Slurry S.G. 1.25) 5,000 gpm @ 125 TDH 315 L/sec @ 38.1 TDH
  Make / Model: John Deere Diesel / 6125HF070
  Type: 6 cylinder, 1205 Liter, Diesel Fuel
  Horsepower @ 2,100 rpm: 425 hp 317 kW
  Fuel Consumption: 20.6 gal./hr. 78 lit./hr.
  Fuel Tanks Capacity: 400 gal. 1,512 liters
  Self Propelled with IMS Starwheel Drive ™ or Cable System
  Type: Horizontal Paddle Bar
  Cutterbar Diameter 26-inches 660 mm
  Cutterbar Length 15.5-feet 3.20
  Drive Direct Drive w/ Dual Hydraulic Motors
  Speed Variable 0 to 95 rpm
  Cutterhead Torque @ 2500 psi (1,724 bar) 15,000 in-lbs 1,718 N-m
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright © 2019