Dredge Brokers - Used Dredgers (Dredges) For Sale

180812-DH

12-inch Horizontal Cutter Dredger, Self Propelled, IMS 7012


12-inch Horizontal Cutter Dredger, Self Propelled, IMS 7012

This listing is for a 12-inch Horizontal Cutter Dredger, Self Propelled, IMS 7012 that was built in 2014 and has 4,000 working hours.The cutter is totaly rebuilt with new Danfoss motors. All hydraulic motors are replaced with new ones and all of the worn hoses have been replaced along with all fluids and filters. The price includes two Booster units as well.

Location: Israel

Select Your Currency
Price in Seller's Preferred Currency
USD 558,000
Price in Your Preferred Currency
USD 558,000
* Approximate; see Terms of Use


Technical Details

         
Principal Dimensions and Characteristics
  Length Over All: 51-feet 5 inches 15.70 m
  Width: 11-feet 8-inches 3.60 m
  Height Over All: 10-feet 5-inches 13.20 m
  Working Draft: 35-inches 889 mm
  Dry Weight: 49,000 lbs 22,226 kg
  Year Built / Where Built 2014 / USA  
International Shipping Dimensions
  Length with Starwheels ™ Removed 49-feet 2 inches 15 m
  Length with Starweel ™ Arms Removed 44-feet 10-inches 13.7 m
  Width: 11-feet 8-inches 3.60 m
  Height w/ Muffler and Air Cleaner Removed 10-feet 0-inches 13.1 m
  Shipping Weight (est) 50,000 lbs 22,680 kg
Dredging Capacities
  Dredging Depth: 30-feet 9.10 m
  Width of Cut: 126-inches 3,200 mm
  Nominal Depth of Cut: 26-inches 660 mm
Dredge Pump
  Make: Georgia Iron Works (GIW) Cast Iron
  Suction Diameter: 12-inches 305 mm
  Discharge Diameter: 10-inches 254 mm
  Max. Sphere Passage: 5-inches 127 mm
  Performance (Slurry S.G. 1.25) 5,000 gpm @ 125 TDH 315 L/sec @ 38.1 TDH
Engine
  Make / Model: John Deere Diesel / 6125HF070
  Type: 6 cylinder, 1205 Liter, Diesel Fuel
  Horsepower @ 2,100 rpm: 425 hp 317 kW
  Fuel Consumption: 20.6 gal./hr. 78 lit./hr.
  Fuel Tanks Capacity: 400 gal. 1,512 liters
Propulsion
  Self Propelled with IMS Starwheel Drive ™ or Cable System
Cutterhead
  Type: Horizontal Paddle Bar
  Cutterbar Diameter 26-inches 660 mm
  Cutterbar Length 15.5-feet 3.20
  Drive Direct Drive w/ Dual Hydraulic Motors
  Speed Variable 0 to 95 rpm
  Cutterhead Torque @ 2500 psi (1,724 bar) 15,000 in-lbs 1,718 N-m
Booster Pumps (2)
  Make/Model: Flowserve / 8M193
  Pump Performance:

700 cubic meters per hour

916 cubic yards per hour
  Motor Type: Electric
  Power: 160 kW x 2 215 hp x 2
         
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright © 2018