Dredge Brokers - Used Dredgers (Dredges) For Sale


12-inch Horizontal Cutter Dredge - IMS 7012 HP

12-inch Horizontal Cutter Dredge - IMS 7012 HP

IMS model 7012 Horizontal Cutter Dredger. The dredger is self propelled using IMS patented "Star Wheel" paddle wheels that can propel the dredger both free running and while dredging. The dredger is also fitted with a cable drive for dredging using anchors.

The Dredger is in excellent condition and ready to go to work immediately.  It has had only one owner since new, and has been used only in fresh water.  The dredger was purchased new in 2017, and current Total Run-time Hours is 2,817.  Tier 3 engine.

Location: State of Oklahoma, USA

Select Your Currency
Price in Seller's Preferred Currency
USD 426,000
Price in Your Preferred Currency
USD 426,000
* Approximate; see Terms of Use

Technical Details

Principal Dimensions and Characteristics
  Length Over All: 51-feet 5-inches 15.70 m
  Width: 12-feet 3.66 m
  Height: 10-feet 5-inches 13.20 m
  Working Draft: 35-inches 889 mm
  Dry Weight: 47,700 lbs 21,636 kg
  Year Built / Where Built 2017 / USA  
  Total Runtime Hours: 2,817  
International Shipping Dimensions
  Length with Starwheels ™ Removed 49-feet 2-inches 15 m
  Length with Starweel ™ Arms Removed 44-feet 10-inches 13.7 m
  Width: 12-feet 3.66 m
  Height w/ Muffler and Air Cleaner Removed 10-feet 0-inches 13.1 m
  Shipping Weight (est) 47,000 lbs 21,319 kg
  Plus One (1) Standard 20-foot ISO Container    
Dredging Capacities
  Dredging Depth: 30-feet 9.10 m
  Width of Cut: 135-inches 3,430 mm
  Nominal Depth of Cut: 26-inches 660 mm
Dredge Pump
  Make: Georgia Iron Works (GIW) High Chrome Pump
  Suction Diameter: 12-inches 305 mm
  Discharge Diameter: 10-inches 254 mm
  Max. Sphere Passage: 5-inches 127 mm
  Performance (Slurry S.G. 1.25) 5,000 gpm @ 125 TDH 315 L/sec @ 38.1 TDH
  Make / Model: John Deere Diesel / 6090HF070 - Tier 3
  Type: 6 cylinder, 1205 Liter, Diesel Fuel
  Horsepower @ 2,100 rpm: 445 hp 332 kW
  Fuel Consumption: 20.6 gal./hr. 78 lit./hr.
  Fuel Tanks Capacity: 400 gal. 1,512 liters
  Self Propelled with IMS Starwheel Drive ™ or Cable System
  Type: Replacable Carbide Steel Teeth
  Cutterbar Diameter 26-inches 660 mm
  Cutterbar Length 135-inches 3,430 mm
  Drive Direct Drive w/ Dual Hydraulic Motors
  Speed Variable 0 to 95 rpm
  Cutterhead Torque @ 2500 psi (1,724 bar) 23,885 in-lbs (Peak) 2,969 N-m (Peak)
  Cutterhead Tip Force: 1,837 lbs. 8,171 N
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright © 2021