190716-DH
10-inch Horizontal Cutter Dredger IMS 4010 LP
This 10-inch Horizontal Cutter Dredger was built in 1996 and rebuilt before 2015 including new pontoons. Since 2015 the engine has been replaced and has only 46 hours on it. Regular maintenance performed including better gauges and safety gear and new wiring. Electronic joystick controls are in a heated, air-conditioned cab. Runs well and everything functions.
The pump is in good condition and was last operating to dredge the river slip. The dredge has never been used in salt water.
There is no discharge line.
Location: State of Oregon, USA
Select Your Currency:
Price in Seller's Preferred Currency:
USD
164,000
Price in Your Preferred Currency:
USD 164,000
* Approximate; see
Terms of Use
Technical Details
Principal Dimensions and Characteristics | ||||
Length Over All: | 38-ft 6-in | 11,7 m | ||
Width: | 9-ft 7-in | 2,9 m | ||
Height Over All: | 9-ft 4-in | 2,8 m | ||
Weight: | 22,000 lbs | 9,979 kg | ||
Dredging Capacities | ||||
Dredging Depth: | 20-feet | 6,1 m | ||
Width of Cut: | 96-inches x 22-in deep | 2,438 mm x 559mm deep | ||
Dredge Pump | ||||
Discharge Diameter: | 6-inches | 152 mm | ||
Performance @ 50-feet (15.24 m) THD | 1,100 gpm | 4164 L/min | ||
Engine | ||||
Make / Model: | John Deere Diesel model 6068HF475 | |||
Type: | 6-cylinder 6.8L | |||
Horsepower: @ 2,400 RPM | 275 hp | 205 kW | ||
Fuel Capacity: | 180 gal. | 681 liters | ||
Fuel Consumption: | 13.2 gal./hr | 51.9 lit./hr. | ||
Cutterhead | ||||
Cutterbar Diameter: | 22-inches | 559 mm | ||
Length: | 96-inches | 2,438 mm | ||
All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice |