Dredge Brokers - Used Dredgers (Dredges) For Sale

190924-DH

6-inch Horizontal Dredger "Dino 6" Complete Package


6-inch Horizontal Dredger "Dino 6" Complete Package

This "Dino 6" dredge has been used for only 636 hours. All hydraulic lines are in great shape. Includes a closed faced impeller with less than 650 yards of sand having gone through it. Also includes an open faced impeller. Trailer and pipe included in sale price. Comes with 300 feet of hard 6” pipe, 100 feet of flex 6 inch pipe and 100 feet of floating gear 6 inch pipe.

This small dredge was developed to perform jobs inaccessible to other equipment. Weighing approximately 4,000 pounds, the Dino 6 can access retention ponds, golf courses, sediment lagoons, home association lakes, marinas, and a myriad of other tasks that excavators and large hydraulic dredges simply cannot get to.

Location: State of Florida, USA

Select Your Currency
Price in Seller's Preferred Currency
USD 88,500
Price in Your Preferred Currency
USD 88,500
* Approximate; see Terms of Use


Technical Details

         
Principal Dimensions and Characteristics
  Length Over All: 21-feet 6,40 m
  Width: 5.92-feet 1,83 m
  Height Over All: 5.33-feet 1,62 m
  Dry Weight: 3,800 lbs 1724 kg
  Year Built / Where Built: 2017 / USA  
  Manufacturer: Geoform International, Inc.
Dredging Capacities
  Dredging Depth: 13-feet 3,96 m
  Cut Width: 66-in 1676 mm
Pontoons (2)
  Length: 192-in 4877 mm
  Width: 2-in 660 mm
  Depth: 22-in 559 mm
  Construction: Stainless Steel  
 
16 gauge, 3 separate compartments each float (6 compartments total) Internal stiffeners on all sides
Slurry Pump
  Make: Geoform International, Inc
  Material: AR Steel, 400 to 500 Birnell
  Discharge Diameter: 6-inches 152 mm
  Performance @ 50-feet (15.24 m) THD 1,100 gpm 4164 L/min
  Impeller Type Open Face  
Engine
  Make / Model: Cummins/ B3.3
  Type: 4-cylinder, diesel
  Horsepower: @ 2,500 RPM 65 hp 48,47 kW
  Fuel Capacity: 30 gal. 113,6 liters
Travel System
  Double pulley hydraulic windlass with 2 hydraulic motors
Cutterhead
  Type: Horizontal Paddle Bar w/ replaceable teeth
  Width: 6-feet 1.8 m
  Diameter of Paddle Bar: 14-inches 355.6 mm
  Drive: Variable speed dual hydraulic motor Direct Drive
         
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright © 2019