IMS Model 5012-LP, Horizontal Cutter Suction Dredge
This dredge is ideal for a number of applications such as canal, reservoir and marina dredging projects. The dredge includes the IMS Razor Tooth Weedmaster Cutterhead which is used to remove aquatic weeds without the purchase of expensive weed removal systems or the use of environmentally toxic chemicals. The Weedmaster has been designed to work in several types of aquatic plants.
IMS Razor Tooth Weedmaster Cutterhead bolts directly to the IMS Model 5012 LP Versi-Dredge in place of the standard cutterhead. The Weedmaster attachment (8-feet) chops the weeds into small pieces - 3-5 inch (76-127mm) - to allow pumping into geotextile bags for decomposing or pumps them to the shore, up to 1km away, using the vegetation dredge pump. Special GPS dredging software and Sonar Depth Sensor results in the most productive machine possible.
(2) pontoons, 39 in. x 38 in. x 408 in. (990 mm x 970 mm x 10,370 mm); 10 ga.steel sides, bottom and 1/4” plate tops, internal bulkheads and stiffeners, and painted w/ a marine grade epoxy paint
GIW cast iron pump
Diameter with teeth:
Speed @ 2,500 psi:
Cutter Tip Force:
Nominal Pump Capacity:
1,033 yds³/ hr
Total Solid Capacity:
260 yds³/ hr
All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.