Dredge Brokers - Used Dredgers (Dredges) For Sale


3-inch Remote Controlled Horizontal Dredge, LWT "Pit Hog" BCV-5

3-inch Remote Controlled Horizontal Dredge, LWT "Pit Hog" BCV-5

LWT Pithog Remote Controlled Dredges purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20' with suction and discharge diameters of 8.75". Pontoon (2) length is 40' with a length overall of 50'-9". Transportation width is 11'-10". Weight estimated as 35,000 lbs.

Bundle price available with 200726-DH

Location: state of California, USA

Select Your Currency
Price in Seller's Preferred Currency
USD 67,000
Price in Your Preferred Currency
USD 67,000
* Approximate; see Terms of Use

Technical Details

Principal Dimensions and Characteristics
  Flotation: Pontoons (2)  
  Length Over All: 15.47 m 50-ft 9-inch
  Width (transportation): 3.606 m 11-ft 10-inch
  Height: 3.352 m 11-ft
    Length: 12.19 m 40-ft
   Width: 1.07 m 42-inch
    Depth: 0.15 m 6-inch
  Weight (est): 15875 kgs 35,000 lbs
  230/460 VAC, 3 Phase, 60 Hz Electrical Power
  Rototiller Motor Drives & Traverse Winch: 56 kW 75 hp
  Slurry Pump Drive, Boom Hoist & Head- Tilt Cylinder:   44.74 kW 60 hp
  Oil Cooler Re-circulating Pump: 5.6 kW 7.5 hp
Slurry Pump
  Gorman-Rupp Model T3A60-B, Self Priming Centrifugal Pump.
  Materials of Construction: Pump Casing - Cast Iron
  Material Seal: Silicon carbide rotary & stationary faces
  Suction & Discharge Diameters: 76.2 mm 3-inch
  Semi-open Impeller Diamter: 223 mm 8.75-inch
  Sphere size 63.5 mm 2.5-inch
Dredging Head
  Dredging Depth: 6.096 m 20-ft
  Hood Assembly: Welded 6061 Marine Grade Aluminum Alloy
  OAL: 2.89 m 9-ft 6-inch
  Rototiller 40 Ditch Witch Teeth (20 RH & 20 LH)
    Diameter: 229 mm 9-inch
    Length: 2.44 m 8-ft
    Diameter: 229 mm 9-inch
  Drive: 45 hp hydraulic motor coupled to 17-4 PH SS Shaft w/ Sprocket Chain power
  Speed Variable 0 to 200 RPM
Lateral Move System & Propulsion
  Automated System w/ shore-based winches strategically located around basin
  Treble SHeave hydraulic winch w/ 3/8" diameter 7 x 9, galvanized wire rope (traverse cable) w/ proximity switches & stops at ends
  Winch Drive - hydraulic motor w/ Planetary Gear Reducer Drive - Traverse Speed Variable from 0 to 130 FPM
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright © 2021