Hydraulic Dredges
201007-DU
14-inch Submersible Pump Dredge, Electric Drive
Pontoon mounted submersible pump with cutter suction (HY400 with Power Pack) was built in 2016 in Italy. The dredge pump has a capacity of 1200 m3/h with a head of 42 m. Dredging depth is 25.0 m. Suction diameter is 1015 mm and discharge pipe diameter is 300 mm. Discharge distance is 1000 mm. The cutter motor is a Radial Piston Motor with 36 hp and 0 - 50 RPM cutter speed.
The dredger comes with a power pack, pontoon, HDPE PIPES, Floaters, San Floats, flexible rubber hoses.
Location: India
Select Your Currency:
Price in Seller's Preferred Currency:
USD
500,000
Price in Your Preferred Currency:
USD 500,000
* Approximate; see
Terms of Use
Technical Details
| General Information | ||||
| Built: | 2016 / Italy | |||
| Principal Dimensions and Characteristics | ||||
| Length Over All: | 11.0 m | 36.09-ft | ||
| Breadth: | 5.5 m | 18.0-ft | ||
| Depth: | 1.2 m | 3.93-ft | ||
| Draft Loaded: | 0.8 m | 2.62-ft | ||
| Weight: | 3600 kg | 7937 lbs | ||
| Main Engine | ||||
| Make/Model: | Caterpillar / C18 ACERT | |||
| Engine RPM: | 2100 RPM | |||
| Engine Power: | 470 kW | 630 bhp | ||
| Power Pack: | Rexroth | |||
| Dredging | ||||
| Dredge Pump | ||||
| Make: | Dragflow Hydraulic Sand Pump / HY400AB | |||
| Head: | 42 m | 137.8-ft | ||
| Pump Capacity: | 1200 m3/h | 1569.5 yd3/ | ||
| Pump RPM: | 750-860 | |||
| Power: | 298 kW | 400 hp | ||
| Weight: | 3600 kg | |||
| Dredge | ||||
| Dredging Depth: | 25.0 m | 82.0-ft | ||
| Suction Diameter: | 1015 mm | 39.96-inch | ||
| Discharge Pipe Diameter: | 350 mm | 13.78-inch | ||
| Discharge Distance: | 1000 mm | 39.37-inch | ||
| Slurry Capacity: | 1000 m3/h | 1308 yd3/h | ||
| Solid Production: | 20 - 60 % | |||
| Cutter Motor | ||||
| Type: | Radial Piston Motor | |||
| No. of Cutter: | 2 (1 set) | |||
| Driver: | Hydraulic | |||
| Diameter (each): | 700 mm | 27.6-inch | ||
| Power: | 26.85 kW | 36 hp | ||
| Cutter Speed in rpm: | 0 - 50 RPM | |||
| Amount of Blades: | 3 blades each | |||
| Number of Teeth | 9 teeth each | |||
| Winch | ||||
| Manufacturer: | Dinamic | |||
| Winch Pressure: | 230 Bar | |||
| Line Pull: | 4500 kg | 9920 lbs | ||
| Line Speed: | 35 m/min | 114.8-ft/min | ||
| Wire Size | 18 mm | 0.71-inch | ||
| Drive | Hydraulic | |||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||