220218-CP

Excavator Pump Attachment 10-inch Eddy Pumps

Non-clog design for high solids industrial pumping applications. Min flow of 1200 gal/min and a max flow of 5000 gal/min. Has a capacity of 300-350 yd3/hr. Only used on one job. Very low hours and in excellent condition.

The attachment is currently set up for a Komatsu 400 excavator. Requires a separate Hydraulic Power Unit to operate. EDDY Pump circuit requirements from excavator auxiliary power OR from Hydraulic Power Unit 120-160 GPM at 5000 PSI (500cc motor). Cutterhead circuit requirements from excavator auxiliary power OR from Hydraulic Power Unit 12-20 GPM at 5000 PSI.

Location: State of California, USA

Select Your Currency:

Price in Seller's Preferred Currency:

USD 163,000

Price in Your Preferred Currency:

USD 163,000

Technical Details


Principal Dimensions and Characteristics

		Length:	154-in	3.9 m
		Height:	48-in	1.2 m
		Width:	46-in	1.17 m
		Rotating Head Diameter:	35-in	90 m
		Weight:	7,500 lbs	3400 kg
Operating Levels
		Min Flow	1200 gal/min	4542 lts/min
		Max Flow:	5000 gal/min	18927 lts/min
		Head Range:	Up to 200-ft	Up to 61 m
		Discharge:	10-in	254 m
		Suction:	12-in	304 m
		Solid Handling:	up to 9-in	up to 229 m
		Max Speed:	1800 RPM	1800 RPM
		Percent Solids:	Up to 40-70% Solids	Up to 40-70% Solids
		Capacity:	300-350 yd3/hr	229-268 m3/hr



	All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice