220306-DB

18-inch (450 mm) Cutter Suction Dredger (CSD)

The IHC Beaver 1200 C Cutter Suction Dredger was built in 2004. Prime mover is a Caterpillar 3508 (Top End 2020 ) with 620 kW. The engine has 37,000 working hours. The dredge pump is a 2016 IHC-1100-200-400. Aux power is a Caterpillar 3306 overhauled in 2019. It has 4,000 hrs. Max dredging depth is 10 m and can be increased to 12.5 m with ladder extension.

All winches have independent hydraulic drive. The two swing winches are supplied with wires of about 100m and anchors of 360kg. All parts are with dimensions to allow the IHC Beaver 1200 to be transported by road, rail or sea. The dredger is equipped with a rapid connection-disconnection system for the pontoons. Various components are mounted in or on the main pontoon, including the cutter ladder, two swing winches, ladder hoisting winch, control cabin, dredge pump, diesel engines and auxiliary power units, discharge line and the spuds with cylinders.

Location: Latvia

Select Your Currency:

Price in Seller's Preferred Currency:

EUR 805,000

Price in Your Preferred Currency:

USD 875,000

Technical Details


General
	Build:		2004
	Flag:		Latvia
	Class:		Latvijas Juras Administracija BV Class1, Hull dredger coastal area
Principal Dimensions and Characteristics
	Length overall:		26.30 m	86.3-ft
	Length over pontoon:		16.50 m	54.1-ft
	Breadth:		6.69 m	22-ft
	Depth:		1.87 m	6.14-ft
	Draft mean with full bunkers:		1.25 m	4.1-ft
Machinery
	Prime Mover:		Caterpillar 3508 (Top End 2020 )
		Hours on Mover:	37,000
		Mover Power:	620 kW	831 hp
	Dredge Pump:		2016 IHC-1100-200-400
		Year Installed:	2016
	Auxiliary Power:		Caterpillar 3306
		Hours:	4,000
		Year:	Major Overhaul with long block replacement 2019 Y
Dredging
	Dredging Depth (max):		10.00 m	32.8-ft
	Dredging Depth (max by ladder extension):		12.50 m	41-ft
	Discharge Diameter Pipe:		450 mm	18-in
	Discharge Diameter of discharge line		500 mm	19.7-in
Spuds:
	Diameter:		457 mm	18-in
	Length for 10m dredging depth:		14 m	46-ft
	Length for 12.5m dredging depth:		17 m	55.8-ft
Additional Parts and Equipment
	Ladder Extender for dredging works up to 12.5m 1SET Floating pipeline PE pipe 500mm OD with flanges about 400m Boll joint 500mm with rubber expansion pipe L= 2000mm 1SET Dredge pump Cover 1pcs Elbow pipe 90 degrees, 450mm ID 1pcs Intermediate pipe 600m, 450mm ID 1pcs Rubber expansion pipe L=1300mm, 450mm ID 1pcs NEW Rubber expansion pipe L=2000mm, 450mm ID 1pcs Rubber compensation joint, 450mm ID, L=200mm 1PCS NEW Seals and gaskets for spud hoisting cylinders, gearbox, dredge pump etc. Hydraulic cartridge Vickers 1pcs Proportional solenoid valve for ladder winch 1pcs Three part clamb ring w130 for cutter drive 3pcs Some any other spares on board. Long spud poles

	All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.