220607-DL

10-inch Swinging Ladder Dredge

Built in 1997 and rebuilt/refurbished in 2012, the swing ladder dredger has an overall length of 64-ft 4-in, a transportation width of 11-ft 10-in and an operating width of 18-ft 6-in. Mean draft is 30-in. Max dredging depth is 18-ft and min is 3-ft. The dredge pump has a suction diameter of 12 inches and a discharge of 10 inches. The impeller diameter is 30 inches. The nominal flow is 4,250 GPM @ 230-ft. A new pump shell was replaced in 2014.

Location: State of New Jersey, USA

Select Your Currency:

Price in Seller's Preferred Currency:

USD 271,000

Price in Your Preferred Currency:

USD 271,000

Technical Details


General
	Build:	1997/rebuild 2012 / DSC Barracuda
Principal Dimensions and Characteristics
	Length Overall:	64-ft 4-in	19.61 m
	Transportation Width:	11-ft 10-in	3.6 m
	Operating Width:	18-ft 6-in	5.6 m
	Hull Depth:	4-ft	1.2 m
	Mean Draft:	30-in	0.76 m
	Fuel Capacity:	750 gal	198 liters
	Dry Width:	83,000 lbs	37648 kg
Working Capacity
	Min. Dredging Depth:	3-ft	0.91 m
	Max. Dredging Depth:	18-ft	5.5 m
Dredge Pump (new pump shell 2014)
	Suction Diameter:	12-in	304 mm
	Discharge Diameter:	10-in	254 mm
	Impeller Diameter:	32-in	812 mm
	Nominal Flow Rate:	4,250 GPM @ 230-ft
Dredge Pump Drive (replace in 2018)
	Reduction Gear:	Twin Disc Model MG 5114
	Reduction Ratio:	2.54 : 1

	All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice