Hydraulic Dredges
220809-DH
12-inch Horizontal Cutter Dredge IMS 7012
IMS model 7012 Horizontal Cutter Dredger. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. The 7012 HP is easy to operate, and its cutterhead design eats away a variety of materials such as sand, gravel, thick mud, light clays, and salt. Dredging depth is 30-ft using Starwheel Drive System and 32.8 usingCable Drive System. Nominal Pump Capacity is1,135 m3/hr. (1,475yds3/hr.). Total Solids Capacity is 284 m3/hr (371 yds3/hr). Runtime: 8,580 hours
Includes
- Pipeline: Approximately 3000’ of 12" pipe - 56 pieces of 60-ft long each. There are 44 floats - 38 rectangle and 6 donuts.
- Trailer: 1999 Ledwell 53’ - Has dovetail, winch, and rollers to load and store dredge
Can be purchased en bloc with IMS 1012 Booster Pump #220807-CP
Location: State of Louisiana, USA
Select Your Currency:
Price in Seller's Preferred Currency:
USD
395,000
Price in Your Preferred Currency:
USD 395,000
* Approximate; see
Terms of Use
Technical Details
| Principal Dimensions and Characteristics | ||||
| Length Over All: | 51-feet 5 inches | 15.70 m | ||
| Width: | 12-feet | 3.66 m | ||
| Height: | 10-feet 5-inches | 13.20 m | ||
| Working Draft: | 35-inches | 889 mm | ||
| Dry Weight: | 47,700 lbs | 21,636 kg | ||
| International Shipping Dimensions | ||||
| Length with Starwheels ™ Removed | 49-feet 2 inches | 15 m | ||
| Lenght with Starweel ™ Arms Removed | 44-feet 10-inches | 13.7 m | ||
| Width: | 12-feet | 3.66 m | ||
| Height w/ Muffler and Air Cleaner Removed | 10-feet 0-inches | 13.1 m | ||
| Shipping Weight (est) | 47,000 lbs | 21,319 kg | ||
| Plus One (1) Standard 20-foot ISO Container | ||||
| Dredging Capacities | ||||
| Dredging Depth w/ Starwheel Drive System: | 30-feet | 9.10 m | ||
| Dredging Depth w/ Cable Drive System: | 32.8-feet | 10 m | ||
| Width of Cut: | 135-inches | 3,430 mm | ||
| Nominal Depth of Cut: | 26-inches | 660 mm | ||
| Dredge Pump | ||||
| Make: | Georgia Iron Works (GIW) Cast Iron LCC-M 250-660 | |||
| Suction Diameter: | 12-inches | 305 mm | ||
| Discharge Diameter: | 10-inches | 254 mm | ||
| Impeller Diameter: | 26-inches | 660 mm | ||
| Max. Sphere Passage: | 5-inches | 127 mm | ||
| Speed (variable): | 0-760 rpm | |||
| Performance (Slurry S.G. 1.25) | 5,000 gpm @ 125 TDH | 315 L/sec @ 38.1 TDH | ||
| Engine | ||||
| Make / Model: | John Deere Diesel / Model 6135HF485; | |||
| Type: | 6 cylinder 13.5 L | |||
| Horsepower @ 1,900 rpm: | 445 hp | 332 kW | ||
| Fuel Consumption: | 22 gal./hr. | 83.3 lit./hr. | ||
| Fuel Tanks Capacity: | 400 gal. | 1,512 liters | ||
| Propulsion | ||||
| Self Propelled with IMS Starwheel Drive ™ or Cable System | ||||
| Cutterhead | ||||
| Type: | Replacable Carbide Steel Teeth | |||
| Cutterbar Diameter | 26-inches | 660 mm | ||
| Cutterbar Length | 135-inches | 3,430 mm | ||
| Drive | Dual Hydraulic Motors, Direct Drive w/ no gear reduction | |||
| Speed | Variable 0 to 60 rpm @2,500 psi | |||
| Cutterhead Torque @ 2500 psi (1,724 bar) | 23,885 in-lbs (Peak) | 2,969 N-m (Peak) | ||
| Cutterhead Tip Force: | 1,837 lbs. | 8,171 N | ||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||