Hydraulic Dredges
221203-DH
10-inch Horizontal Cutter Dredger, IMS 4010
Built in 2002 in USA. Dredging depth of 6.1 m with a production capacity of 150 m3/hr. Discharge distance of 400 m. Hydraulic system pump is a Parker PAVC100BR46C3/PAVC65WB2R4A, a variable displacement, axial piston and a fixed displacement pump. Pump capacity is 100 gpm @2,000 psig. Cutter head has a diameter of 559 m and a length of 2.4 m. 10 inch submersible dredge pump is mounted directly behind cutterhead. 60 m of discharge hose and floats are included.
Location: West Coast of South Korea
Select Your Currency:
Price in Seller's Preferred Currency:
USD
249,000
Price in Your Preferred Currency:
USD 249,000
* Approximate; see
Terms of Use
Technical Details
| General | ||||
| Built: | 2002 IMS from USA | |||
| Principal Dimensions and Characteristics | ||||
| Length Over All: | 10.783 m | 35.38-ft | ||
| Length of Hull: | 7.42 m | 24.34-ft | ||
| Width: | 2.898 m | 9.5-ft | ||
| Depth: | 0.86 m | 2.82-ft | ||
| Displacement: | 7,227 Ton | 8 tons | ||
| Light Weight: | 5,855 Ton | 6.5 tons | ||
| Engine & Machinery | ||||
| Engine Make/Model: | Cummins #6BTA, 6 Cylinder, Turbocharged & After cooled | |||
| Engine Power @ 2500RPM: | 130 kW | 174 hp | ||
| Fuel: | Use Only No.2 diesel | |||
| Fuel Capacity: | 662 ltr | 175 gal | ||
| Dredging | ||||
| Dredging Depth: | 6.1 m | 20-ft | ||
| Discharge Diameter: | 254 | 10-in | ||
| Dredging Capacity: | 150 m3/hr | 196 yd3/hr | ||
| Discharge Distance: | 400 m | 131-ft | ||
| Hydraulic System | ||||
| Pump: | Parker PAVC100BR46C3/PAVC65WB2R4A, a variable displacement, axial piston and a fixed displacement pump | |||
| Pump Capacity: | 100 gpm @2,000 psig | |||
| Hydraulic Reservoir: | 65 equipped with low oil level and high oil temperature alarm contact switches | |||
| Filtration: | 100% return flow through a 10 micron filter and 5% of flow through a secondary 1 micron filter with water removal capacity | |||
| Relief Valve settings: | Circuit #1, Dredge Pump: 2,500 psig Circuit #2, All other functions: 2,900 psig |
|||
| Hydraulic Oil: | Use Only Shell Rotella T30 or equal | |||
| Cutter head | ||||
| Cutter Diameter: | 559 m | 22-in | ||
| Cutter Length: | 2.4 m | 8-ft | ||
| Floatation | ||||
| Discharge Hose Diameter: | 254 | 10-in | ||
| Discharge Hose Length: | 60 m | 197-ft | ||
| Floats: | floats 9 ea x 6m for flexible discharge hose, floats 17 ea for plastic discharging tube | |||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||