Hydraulic Dredges
230302-DH
12-inch Horizontal Dredge IMS 7012
IMS model 7012 Horizontal Cutter Dredger built in 2014. Reported to be in good working condition. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge with a dry weight of 47,700 lbs (21,636 kg). Dredging depth is 30-ft using Starwheel Drive System and 32.8 using Cable Drive System. Cutterhead torque is 23,885 in.-lbs. (2,969 N-m) @ 2,500 psi (peak) and Cutterhead tip force is 1,837 lbs. (8,171 N).
Location: India
Select Your Currency:
Price in Seller's Preferred Currency:
USD
508,000
Price in Your Preferred Currency:
USD 508,000
* Approximate; see
Terms of Use
Technical Details
| Principal Dimensions and Characteristics | ||||
| Length Over All: | 51-feet 5 inches | 15.70 m | ||
| Width: | 12-feet | 3.66 m | ||
| Height: | 10-feet 5-inches | 13.20 m | ||
| Working Draft: | 35-inches | 889 mm | ||
| Dry Weight: | 47,700 lbs | 21,636 kg | ||
| International Shipping Dimensions | ||||
| Length with Starwheels ™ Removed | 49-feet 2 inches | 15 m | ||
| Length with Starweel ™ Arms Removed | 44-feet 10-inches | 13.7 m | ||
| Width: | 12-feet | 3.66 m | ||
| Height w/ Muffler and Air Cleaner Removed | 10-feet 0-inches | 13.1 m | ||
| Shipping Weight (est) | 47,000 lbs | 21,319 kg | ||
| Dredging Capacities | ||||
| Dredging Depth w/ Starwheel Drive System: | 30-feet | 9.10 m | ||
| Dredging Depth w/ Cable Drive System: | 32.8-feet | 10 m | ||
| Width of Cut: | 135-inches | 3,430 mm | ||
| Nominal Depth of Cut: | 26-inches | 660 mm | ||
| Dredge Pump | ||||
| Make: | Georgia Iron Works (GIW) | |||
| Suction Diameter: | 12-inches | 305 mm | ||
| Discharge Diameter: | 10-inches | 254 mm | ||
| Impeller Diameter: | 26-inches | 660 mm | ||
| Max. Sphere Passage: | 5-inches | 127 mm | ||
| Speed (variable): | 0-790 rpm | |||
| Performance (Slurry S.G. 1.25): | 5,000 gpm @ 125 TDH | 315 L/sec @ 38.1 TDH | ||
| Engine | ||||
| Make / Model: | John Deere Diesel / Model 6135 AFM85; | |||
| Type: | 6 cylinder 13.5 L | |||
| Horsepower @ 1,900 rpm: | 500 hp | 373 kW | ||
| Fuel Consumption: | 22 gal./hr. | 83.3 lit./hr. | ||
| Fuel Tanks Capacity: | 400 gal. | 1,512 liters | ||
| Propulsion | ||||
| Self Propelled with IMS Starwheel Drive ™ or Cable System | ||||
| Cutterhead | ||||
| Type: | Replacable Carbide Steel Teeth | |||
| Cutterbar Diameter | 26-inches | 660 mm | ||
| Cutterbar Length | 135-inches | 3,430 mm | ||
| Drive | Dual Hydraulic Motors, Direct Drive w/ no gear reduction | |||
| Speed | Variable 0 to 60 rpm @2,500 psi | |||
| Cutterhead Torque @ 2500 psi (1,724 bar) | 23,885 in-lbs (Peak) | 2,969 N-m (Peak) | ||
| Cutterhead Tip Force: | 1,837 lbs. | 8,171 N | ||
| All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice | ||||