221108-DB

20 inch Ellicott Dredge 1870

Built in 2019 by Ellicott. The series 1870 Dragon cutterhead dredge is a medium to large size dredge that is portable and can be transported by truck. It has a max dredging depth of 50-ft (15 m). Total installed power not including standard Genset is 1,755 hp (1,309 k). Power at Cutter Shaft is 250 hp (186 kW). Cutter diameter is 54-in (1,372mm). Cutting force is 14,900 lbs (6,759 kg). This dredge has been exposed to sea water most of its life. It has been sitting dormant and not been used for over 8 months.

Available 14,000-ft of 20-inch OD SDR-17 HDPE Pipe with floats & Pipe angles for an additional cost.

Location: State of Virginia, USA

Select Your Currency:

Price in Seller's Preferred Currency:

USD 3,077,000

Price in Your Preferred Currency:

USD 3,077,000

Technical Details


Principal Dimensions and Characteristics
	Length Overall:	35.5 m	117-ft
	Length, Hull:	25 m	82-ft
	Width:	8.2 m	27-ft
	Depth, Hull:	1.8 m	6-ft
	Dry Weight:	186,000 kg	410,000 lbs
	Draft (not including spuds):	1.2 m	4-ft
	Swing Capacity @ min dredging depth:	46.3 m	152-ft
	Swing Capacity @ max dredging depth:	37.2 m	122-ft
Engine
	Type:	Caterpillar 3512
	Power:	955 kW	1,280 hp
	Fuel Capacity:	29,900 liters	7,900 gals
	Auxiliary Engine:	Caterpillar C-15
	Power:	354 kW	475 hp
	Rating:	Tier 3	Tier 3
Cutter Drive
	Power at Cutter Shaft:	186 kW	250 hp
	Cutter Diameter:	1,327 mm	54-in
	Cutter Speed:	18-27-36 rpm
	Cuttering Force:	6,759 kg	14,900 lbs
Dredge
	Type:
	Discharge Diameter:	500 mm	20-in
	Suction Diameter:	500 mm	20-in
	Dredging Depth:	15 m	50-ft
Spuds
	Diameter:	610 mm	24-in
	Length:	20.4 m	67-ft

	All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.