Dredge Brokers - Used Dredgers (Dredges) For Sale


140-tonne Self Propelled Multi-Hopper Barge

140-tonne Self Propelled Multi-Hopper Barge

This Multi-Hopper Barge was built in 1965 and re-built in 2000 and its Classification Society is RINA (Registro Italiano Navale). This unit has been managed since 1975 and the maintenance works are constant all the hull plates were changed in the past and the thickness was increased. The structure was reinforced in correspondence of the crane zone. There are four lifting points to lift the pontoon.

Flag: Italian
Navigation documents from Italian flag until October 2012

Located in Spain

For Charter

Technical Details

Principal Dimensions and Characteristics
  Length Over All: 25.00 m 82 feet
  Beam: 8.00 m 26 feet
  Depth: 2.00 m 7 feet
  Draft Max: 1.60 m 5 feet
  Speed: 7.5 knots
  Load Capacity: 140 tonnes
  Year Built:      1965
  Year Rebuilt: 2006
  Classification Society: RINA (Registro Italiano Navale)
Propulsion Engines (2)
  Make/Model: IVECO-AIFO / 8361 SM21 - built 2002
  Power: 130 kW x 2 175 hp x 2
Auxiliary Generator  
  Capacity: 10 kVA
Tilting Caisson (5)      
  Capacity (approx.): 20 cubic meters x 5 26 cubic yards x 5
Hydraulic Excavator      
  Make/Model: O&K RH 9 PMS II
  (2) Hydraulic hammers of 3.000 kg (Montabert new 2000 and Krupp 2005)
  (2) Hydraulic orange peel grabs for rock dredging of 1.5 m3 (1.96 cu-yd) - (Built in 2004 and 1990)
  (1) Hydraulic grab of: 1.8 m3 2.35 cu-yd
  Maximum Dredging Depth: 8 m 26 feet
  (It depends on the equipment installed)
  It is possible to put on board different crane for example wire cranes.
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright © 2019