Dredge Brokers - Used Dredgers (Dredges) For Sale


200 m3 Inland Hold Dredger w/Conveyor Offloading

200 m3 Inland Hold Dredger w/Conveyor Offloading

This Dredge was built in 1935, a large part of the hull was replaced in 2006 and the sides of the cargo hold were replaced in 2007, (heavy duty 12 mm (0.47 inch) steel plate). The vessel has been in the harbour since September 2011 and therefore out of classification. Classification has not been renewed since 2012.

The vessel specializes in dredging in shallow waters/harbors, and has the plus point that it can suck the sand dry and unload it by conveyor belt. It also has a sieve installation, to sieve the sand to a desirable size from 0.4 mm till 40 mm before it goes to the cargo hold.

The ship has a cabin, in which there is a table and a kitchen and a separate cabin with a bunk bed.

Located in The Netherlands

Select Your Currency
Price in Seller's Preferred Currency
EUR 110,000
Price in Your Preferred Currency
USD 122,222
* Approximate; see Terms of Use

Technical Details

  Year Built:      1935
  Year Hull and Sides of cargo hold replaced: 2006, 2007
Principal Dimensions and Characteristics
  Length Over All: 45.00 m 148 feet
  Beam: 6.90 m 23 feet
  Draft (empty): 1.10 m 4 feet
  Cargo Hold Capacity (approx.): 200 cubic meters 262 cubic yards
  Offloading Conveyor Belt: 17 m 56 feet
  Speed (empty/loaded): 16.0 knots/13.5 knots
Main Engine
  Make/Model: Scania / DS1140
  Power: 221 kW 296 hp
Dredging Capacity
  Maximum Dredging Depth: 17 m 56 feet
  Minimum Dredging Depth (approx.): 3 m 10 feet
Loading Pump  
  Engine for Loading Pump (Make/Model): DAF /1160 - 6 cylinder
  Power: 224 kW 300 hp
  Water Capacity: 345 cubic meters/hr 451 cubic yards/hr
  Water/Sand Mixture Capacity: 300 cubic meters/hr 392 cubic yards/hr

Winch totally overhauled in 2010 and powered by a Scania 6 cylinder motor.

Equipment in the Wheel House           
  Hydraulic Autopilot System
  Rudder Gauge
  Course Gauge
  Depth Gauge (NEW)
  Radar (Brand: DECCA)
  VHF Radio x 2
  AIS Transponder (NEW)
  Laptop with Navigation for the Netherlands / North Belgium (if needed).
Extra Parts           
  3 complete revision sets for loading pump.
  Steel Wires
  Welding equipment etc...
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright © 2021