Dredge Brokers - Used Dredgers (Dredges) For Sale

120929-DH

10-inch Horizontal Dredger, IMS 4010

10-inch Horizontal Dredger, IMS 4010

This Dredge is fully operational and ready to work. It has a new dredge pump shell, and the pontoons are in very good condition. The engine was recently Rebuilt, and it has about 2,500 total runtime hours on it.

The Price includes about 2,500-feet of 10-inch HDPE (plastic) pipe, mixed SDR 26 and SDR 17 rating.

Located in The State of Louisiana, USA

Select Your Currency
Price in Seller's Preferred Currency
USD 138,000
Price in Your Preferred Currency
USD 138,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
  Length Over All: 11.7 m 38.6 feet
  Width: 2.9 m 9.7 feet
  Height: 2.8 m 9.4 feet
  Weight: 9,979 kg 22,000 lbs
  Flotation:
  Pontoons (2): 889 x 965 x 7,848 mm 35 x 38 x 309 inches
  10 ga. steel sides and bottom w/ 1/4" diamond deck; internal bulkheads and stiffeners; and coal tar based
  TNEMEC paint on the outside.
  Displacement: 10,160 kg 22,400 lbs
Dredging Capacity  
  Cut (wide x deep): 2,438 x 559 mm 96 x 22 inches
  Dredging Depth: 6.1 m 20 feet
Main Engine
  Make/Model: Cummins
  Power: 132 kW 177 hp
  Runtime Hours: 2,500 total runtime hours
Hydraulic System   
  Circuit #1: Slurry Pump
    4.6 in³/rev.
    45 gpm (2.84 liter/sec.) @ 5,500 psig
  Circuit #2: Cutter head, Boom, Winches and Starwheels®
    6.0 in³/rev. load sense
    59 gpm (3.72 liter/sec.) @ 2,500 psig
  Reservoir: 454 liters 120 gallons
  Filtration: 2 tank mounted return filters with a 10-micron rating and indicator
    suction filter for the slurry pump circuit 3-micron rating and indicator
    filter with water removal capability are optional.
Cutter Head      
  Cutter bar (diameter x length): 559 x 2,438 mm 22 x 96 inches
    Replaceable hardened steel excavator blades available with
    paddlebar for materials that are not easily slurried.
  Drive: Recessed dual hydraulic motor; direct drive with no gear reduction.
  Speed: Variable to 90 rpm @ 2,500 psi
  Torque: 12,960 in-lbs. (1,475 N-m) @ 2,500 psi
Dredge Pump  
  Make/Model: IMS
  Discharge Diameter: 254 mm 10 inches
  Suction Diameter: 254 mm 10 inches
  Impeller Diameter: 495 mm 19.5 inches
  Sphere Passage: 152 mm 6.0 inches
  Pump Performance: 3,000 gpm (189 liter/sec) @ 70 ft. (21,3 m) TDH (water) @ 1,180 rpm.
Controls      
  Electronic joystick controls are provided in a heated, air-conditioned cab.
Propulsion  
  Starwheel Drive self-propulsion (patented)
  Secondary Propulsion: Is set up for optional cable rigging in lined ponds
Electrical System      
  Voltage: 12 volt, negative ground
  Alternator Output: 130 Amp
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
 
Copyright 2005