Dredge Brokers - Used Dredgers (Dredges) For Sale

120938-DH

New 10-inch Cutter Suction Dredger

New 10-inch Cutter Suction Dredger

This dredger can apply to most kinds of geologic structures and can be widely used in mineral digging, port (channel) dredging and reclamation works. By absorbing advanced technology of Dutch and American related products, this dredger shows its characteristics of rational design, all hydraulic control, simple operation, little maintenance and strong power.

Located in China

Delivery can usually be made in 90 days of order, depending on the shipyard work load.

Select Your Currency
Price in Seller's Preferred Currency
USD 270,000
Price in Your Preferred Currency
USD 270,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
  Length Over All (w/ladder raised): 23.00 m 75 feet
  Length Over Pontoons: 14.00 m 46 feet
  Beam: 5.20 m 17 feet
  Depth: 1.60 m 5 feet
  Mean Draft (w/full bunkers, approx.): 1.10 m 4 feet
  Dredging Depth: 8.00 m 26 feet
  Main Pontoons: 10.50 x 2.20 x 1.60 m 34 x 7 x 5 feet
  Side Pontoons: 14.00 x 1.60 x 1.60 m 46 x 5 x 5 feet
  Total Dry Weight (approx.): 45 tonnes
Main Engine
  Make/Model: Cummins / NTA855 (Diesel Engine)
  Power @ 1,800 RPM: 336 kW 450 hp
Standby Generator
  Make/Model: Weichai/ K4100
  Power: 30 kW 40 hp
Dredge Pump
  Make/Model: JL800-200WN
  Power at shaft: 200 kW 268 hp
  Dredge Pump driven via reduction gear box.
  Suction Pipe Diameter: 300 mm 12 inches
  Discharge Pipe Diameter: 250 mm 10 inches
  Water Flow: 800 cubic meters/hr 1,046 cubic yards/hr
Cutter
  Make/Model: JL100-40
  Type: 5-Blades with changeable chisels
  Power: 40 kW 60 hp
  Diameter: 1,000 mm 39 inches
  Speed: 0~35 rev/min
Winches        
  Ladder / Swing Winches:
  Line Pull, 1st Layer: 40/40 kN
  Max, Line Speed (approx.): 20/20 m/min. 66/66 feet./min.
  Wire Diameter: 16/16 mm 0.6/0.6 inches
  Drum Diameter: 305/305 mm 12/12 inches
  All winches have independent hydraulic drive.
  The two swing winches are supplied with wires of 100 m (328 ft.) and anchors of 160 kg.
Spuds            
  Length: 12 m 39 feet
  Diameter: 325 mm 13 inches
  Weight (approx.): 1,400 kg
Spud Hoisting Rams
  Core diameter: 125 mm 5 inches
  Ram Stroke: 1.80 m 590 feet
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
 
Copyright 2005