Dredge Brokers - Used Dredgers (Dredges) For Sale

120939-DH

16-inch Cutter Suction Dredger

16-inch Cutter Suction Dredger

This dredger can apply to most kinds of geologic structures and can be widely used in mineral digging, port (channel) dredging and reclamation works. By absorbing advanced technology of Dutch and American related products, this dredger shows its characteristics of rational design, all hydraulic control, simple operation, little maintenance and strong power.

Located in China

Select Your Currency
Price in Seller's Preferred Currency
USD 730,000
Price in Your Preferred Currency
USD 730,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
  Length Over All (w/ladder raised): 33.00 m 108 feet
  Length Over Pontoons: 24.00 m 79 feet
  Beam: 6.4 m 21 feet
  Depth: 1.80 m 6 feet
  Mean Draft (w/full bunkers, approx.): 1.20 m 4 feet
  Dredging Depth: 14.00 m 46 feet
  Main Pontoons: 14.00 x 3.00 x 1.80 m 46 x 10 x 6 feet
  Side Pontoons: 24.00 x 1.70 x 1.80 m 79 x 6 x 6 feet
  Total Dry Weight (approx.): 100 tonnes
Main Engine
  Make/Model: Cummins / KTA38-M1
  Power@ 1,800 RPM: 746 kW 1,000 hp
Standby Generator
  Make/Model: Weichai/ K4100
  Power: 30 kW 40 hp
Dredge Pump
  Make/Model: JL2000-300WN
  Power at shaft: 500 kW 671 hp
  Dredge Pump driven via reduction gear box/ hydraulic coupler.
  Suction Pipe Diameter: 450 mm 18 inches
  Discharge Pipe Diameter: 406.4 mm 16 inches
  Discharge Distance: 1,500 m 4,921 feet
  Water Flow: 2,000 cubic meters/hr 2,616 cubic yards/hr
  Capacity: 400 cubic meters/hr 523 cubic yards/hr
Cutter
  Make/Model: JL130-100
  Type: 5-Blades with changeable chisels
  Power: 100 kW 134 hp
  Diameter: 1,300 mm 51 inches
  Speed: 0~35 rev/min
Operation System
  Hydraulic System´╝îPLC Control
Winches        
  Ladder / Swing Winches:
  Line Pull, 1st Layer: 60/60 kN
  Max, Line Speed (approx.): 20/20 m/min. 66/66 feet./min.
  Wire Diameter: 20/20 mm 0.8/0.8 inches
  Drum Diameter: 380/380 mm 15/15 inches
  All winches have independent hydraulic drive.
  The two swing winches are supplied with wires of 100 m (328 ft.) and anchors of 300 kg.
Spuds            
  Length: 18 m 59 feet
  Diameter: 450 mm 18 inches
  Weight (approx.): 4,000 kg
Spud Hoisting Rams
  Core diameter: 125 mm 5 inches
  Ram Stroke: 1.80 m 590 feet
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
 
Copyright 2005