Dredge Brokers - Used Dredgers (Dredges) For Sale

121061-DA

8-inch Nessie Dredge Model 8DX

8-inch Nessie Dredge Model 8DX

This Nessie Dredge model # N8DX was built in 2000 and has approximately only 480 runtime hours. It is in good working condition and comes with a Hydraulic tilt - 2 axle - 8 wheel tandem trailer and approximately 1,000 feet of pipeline.

Located in Russia

Select Your Currency
Price in Seller's Preferred Currency
USD 380,000
Price in Your Preferred Currency
USD 380,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
  Year Built:      2000
  Length Over All: 6.68 m 21.9 feet
  Width of Frame: 2.21 m 7.2-1/2 feet
  Width of Outriggers: 4.53 m 14.8-1/2 feet
  Hull Height (Dry): 2.26 m 7.4 feet
  Draft (Depth in Water): 431.8 mm 17 inches
  Freeboard: 660.4 mm 26 inches
  Floatation, Outriggers: 10 count Polyethylene Floats
  Arm Swing Pontoons: 2 count Polyethylene
  Weight of Dredge (Dry): 16,592 Lbs.
   
  Trailer Dimensions: 8.5 x 2.6 m 28 x 8. 4 feet
  Weight of Trailer: 3,680 Lbs.
  Spuds (each of 4): 127 mm x 127 mm x 7.31 m Sq. 5 in. x 5 in. x 24 ft. Sq.
  Weight per Spud: 500 Lbs.
  Directional Arm Length: 6.10 m 20 feet
  Directional Arm with Cutter head: 7.62 m 25 feet
Main Engine
  Make/Model: Caterpillar / 3208T: Turbo charged V-8 Diesel
  Continuous Power Rating: @ 2,400 RPM: 149 kW 200 hp
  Intermittent Power Rating: 186 kW 250 hp
  Fuel Consumption/Capacity: 1.70 liters/hp per hour .045 gallons/hp per hour
  Fuel Capacity: 413 liters 109 gallons
Dredging Pump
  Make/Model: Keene / 6100
  Material: Hi Chrome White Iron
  Impeller Design: Vortex
  Diameter: 203.2 x 203.2 x 635 mm 8 x 8 x 25 inches
  Maximum Working Pressure: 185 Feet of head at 80 PSI
  Priming Pump Model: 350
  Intake and Discharge size: 101.6 x 76.2 mm 4 x 3 inches
  Capacity: 400 GPM
Bucket Wheel Cutter Head      
  Maximum Horizontal Sweep: 15.54 m 51 feet
  Weight: 580 Lbs.
  Maximum Depth Reach: 6.10 m 20 feet
  Bucket Wheel Cutter Head Drive: Hydro Planetary
  Bucket Wheel Cutter Head Diameter: 1,066.8 mm 42 inches
  Hydraulic Drive Motor (Make/Model): Parker / MZG-514
  Displacement: 3.10 cubic inches per Revolution
  Automatic Swing Motion Final Drive: Auburn Gear, Mod 6
  Length of Swing Cut: 6 feet at 90 degrees
  Double Reduction Ratio: 16.88 to 1
Thruster Propulsion Hydraulic Controls            
  Sundstrand TAM 22/90/26.5 162 cubic feet per Revolution
  Max. Continuous Speed: 3,000 RPM
  40 hp (30 kW) at 3,000 RPM Propellers: 13-1/4 inch (336.6 mm) diameter
  3 Blades 17 Degree Pitch Cupped
Directional Controls      
  Twin Joysticks for all functions of Dredging Arm
  Electro-Hydraulic Solenoid and Manual 4-Way Valves
  Electric Switches for all other Functions
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
 
Copyright 2005