Dredge Brokers - Used Dredgers (Dredges) For Sale

121121-DB

8-inch (203 mm) Cutter Suction Dredger

8-inch (203 mm) Cutter Suction Dredger

The dredger was bought by the current owner in July, 2011 and was used for magnetic sand processing. It was used for roughly about six months and has not been used again as of this date.

The owner made some improvements to the dredger at the time of purchase as follows:

1. Added side pontoons to improve the front floatation of the dredger.
2. Replaced the swing and spud winches with bigger capacity.
3. Made a housing for the generator as there was none when it was delivered.

Located in The Philippines

Select Your Currency
Price in Seller's Preferred Currency
PHP 12,245,000
Price in Your Preferred Currency
USD 265,101
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
  Hull Length: 11.60 m 38 feet
  Hull Width: 4.2 m 14 feet
  Hull Depth: 1.5 m 5 feet
  Draft: 1.1 m 4 feet
  Dredging Depth: 6.0 m 20 feet
  Ladder Length: 8.1 m 27 feet
  Discharge Distance: 600 - 800 m 1,969 - 2,625 feet
  Cabin: Operation Desk, chair, A/C
  Middle Pontoon (steel thickness at base): 8 mm 0.31 inches
  Side Pontoon (steel thickness at base): 6 mm 0.24 inches
  Upper Deck Steel (anti-slip steel plate): 4 mm 0.16 inches
  Side Pontoon (steel at base): 6 mm 0.24 inches
  Sides / Upside Down (anti-slip surface): 4 mm / 4 mm 0.16 inches / 0.16inches
Main Engine
  Make/Model: Weichai Diesel / 6160
  Power @ 1,000 RPM 255 kW 342 hp
Generator
  Make/Model: Weichai
  Power @ 1,000 RPM 75 kW 100 hp
Pump 
  Make/Model: Shijiazhuang
  Discharge Diameter: 254 mm 10 inches
  Suction Diameter: 203 mm 8 inches
  Water Flow: 800 - 900 cubic meters/hr 1,046 - 1,177 cubic yards/hr
  Discharge Distance: 800 m 2,625 feet
Cutter           
  Cutter diameter: 1,000 mm 39 inches
  Cutter power: 40 kW 54 hp
  Cutter speed: 0 – 30 RPM
Winches         
  Ladder Hoist Winch:
  Line Pull - Second Layer: 4,932 kg
  Line Speed - Second Layer: 0 - 31.5 m/min
  Wire Size: 18 mm 0.71 inches
  Ladder Hoisting Speed: 14.5 m/min
  Direct Line Swing Winches (2):
  Line Pull - Second Layer: 2,968 kg
  Line Speed - Second Layer: 27.5 m/min
  Wire Size: 16 mm 0.63 inches
  Spud Winches (2):
  Line Pull - Second Layer: 7,430 kg
  Line Speed - Second Layer: 7.4 m/min
  Wire Size: 16 mm 0.63 inches
  Spuds (2):
  Spud Outside Diameter: 325 mm inches
  Spud Length: 13 m 0.51 feet
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
 
Copyright 2005