Dredge Brokers - Used Dredgers (Dredges) For Sale

140627-DB

12-inch DSC Cutter Suction Dredger

12-inch DSC Cutter Suction Dredger

This Dredger was built in 1989 and the Cummins Model # VTA 1710 diesel V12 was recently completely rebuilt.


Located in the State of Michigan, USA

"All offers considered"

Select Your Currency
Price in Seller's Preferred Currency
USD 616,000
Price in Your Preferred Currency
USD 616,000
* Approximate; see Terms of Use

Technical Details

 
Principal Dimensions and Characteristics
  Year Built:      1989
  Ladder Assembly (L x W x D): 19.8 x 2.74 x 1.13 m 65 x 9 x 3.7 feet
  Ladder Assembly weight: 60,000 lbs
  Flotation Pontoons (2) (L x W x D): 18.3 x 1.83 x 1.52 m 60 x 6 x 5 feet
  Flotation Pontoons (2) Weight: 20,000 lbs
  Main Hull (center) (L x W x D): 7.62 x 3.05 x 1.52 m 25 x 10 x 5 feet
  Main Hull (center) Weight: 30,000 lbs
  Operator Cabin (L x W x D): 2.44 x 2.44 x 2.13 m 8 x 8 x 7 feet
  Operator Cabin Weight: 4,000 lbs
  Ladder A frame Weight: 6,000 lbs
  Total Dry Weight: 140,000 lbs
  Operating Weight: 175,000 lbs (with 4,000 gallons (15,142 liters) of fuel)
  Waterplane Area: 970 sq. ft.
  Digging Depth: 10.7 m 35 feet
  Styrofoam Floats: (41) 1,295 x 3,099 x 686 mm (41) 51 X 122 x 27 inches
  New computerized CONVAC suction bypass system
  3-Wire Positioning System
  New Dredging Cable
Main Engine
  Make/Model: Cummins / VTA 1710 diesel V12 (recently completely rebuilt)
  Power: 597 kW 800 hp
Auxiliary Engine
  Make/Model: CAT / 34068
  Power: 242 kW 325 hp
Main Dredge Pump (Submerged Ladder Pump)
  Make/Model: Heavy-Duty Metso mineral pump
  Pump Ratings (from manufacture - new condition)
  All ratings are at 17 ft/see Velocity
  6,000 GPM - 600 TPH min - 750 TPH max (clean coarse sand)
  Suction: 356 mm 14 inches
  Discharge: 305 mm 12 inches
  Impeller size: 1,016 mm 40 inches
  Shaft Diameter: 163.51 mm 6 - 7/16 inches
  Complete Pump Weght: 23,000 lbs (approx.)
  Heavy-Duty Lufkin Gear reduction on main pump
Hydraulic Cutterhead
  Power: 75 kW 100 hp
  Size: 1,067 mm 42 inches
Cast Radius Elbows  
  Make/Model: Thomas
  Dimensions:

12 x 813 mm, 12 x 1,219 mm

12 x 32 inches, 12 x 48 inches
Dredge Tubes (Rubber)
  Dimensions: 305 mm x 4 m 12 inches x 14 feet
Steel Pipe
  Quantity / Dimensions: 914 m / 305 mm x 4 m 3,500 feet / 12 inches x 14 feet
Plastic Pipe
  Quantity / Dimensions: 390 m / 305 mm 1,280 feet / 12 inches
Montgomery Wards Boat
  Length Over All: 5 m 16 feet
Marine Engine  
  Make/Model: 1997 Mercury / 90elpto
  Power: 67 kW 90 hp
Work Done To The Dredge: 
  Rebuilt Pillow block bearing 6-2006 - By: ET MacKenzie Co.
  Replaced fresh water pump 6-2006 - By: Crumy Pumps & ET MacKenzie
  Replaced main hydraulic control valve wi electric over hydraulic 4-2007 - By: ET MacKenzie Co.
  Replaced all hydraulic winches 4-2007 - By: ET MacKenzie Co.
  Rebuilt V-12 by Cummins 4-2007 - By: Bridgeway Cummins
  Rebuilt V-12 radiator 4-2007 - By: D&B Radiator
  Installed new Con-Vac system 4-2007 - By: Twinkle Co. & ET MacKenzie
  Replaced cutterhead, cutterhead drive, and control valve 4-2007 - By: Twinkle Co. & ET MacKenzie
  Replaced main engine drive coupler 6-2008 - By: ET MacKenzie Co. & Cathey Co.
  Replaced Main Pump 8-2008 - By: Metso Minerals & ET MacKenzie Co.
  Rebuilt all Auxilary pumps and replaced aux drive coupler 6-2009 - By: Wellers
  Installed CAT 3406 6-2009 - By: ET MacKenzie Co.
  Rebuilt main engine clutch 6-2009 - By: Wellers
  Rebuilt Lufkin gearbox 6-2009 - By: Lufkin Industries
  Rebuilt main drive shaft 6-2009 - By: ET MacKenzie Co.
  Rebuilt Stave Bearings 6-2009 - By: ET MacKenzie Co.
  Rebuilt Radiator for Aux engine 2009 - By: D&B Radiator
  Installed a new Pump ImpelIer in main pump 5-2011 - By: ET MacKenzie Co.
   
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
Copyright 2005